商品 详情
路博润ESTANE R185A TPU

¥ 0

  • ≥ 1 起订量
  • 10000吨 总供应
  • 广东 深圳 所在地
深圳市骏塑科技有限公司
产品详情

路博润ESTANE R185A TPU

Technical Data Sheet Type: ESTANE? R185A is a Shore 85A, polyether type thermoplastic polyurethane (TPU). Uses: Injection Molding, Extrusion *Test samples were annealed at 100°C and 24 hours at room temperature before testing. **These are typical values and should not be used for specifications. Injection Molding Guide ? These settings are to be used only as a guide. This is a typical injection molding temperature profile based on the Test Machine (conditions based on a 75 ton machine with a general purpose screw – L/D 17 – ? 35mm). The optimal run conditions for specific equipment will vary depending on the machine and mold design. Drying Conditions Physical Properties Value (Metric) Unit Test Method Hardness 87 Shore A ASTM D2240 Specific Gravity 1.10 g/cm3 ASTM D792 Mechanical Tensile Stress: kgf/cm2 ASTM D412 at 100 % Elongation 60 at 300 % Elongation 100 Tensile Strength 320 kgf/cm2 ASTM D412 Ultimate Elongation 700 % ASTM D412 Tear Resistance (Die C) 95 kgf/cm ASTM D624 Abrasion Loss 45 mm3 loss ISO 4649 Compression Set 1 ASTM D395 At 23°C X22hr 15 % At 70°C X22hr 45 % Mold Shrinkage 0.015 m/m ASTM D955 Thermal Vicat Softening Temperature 90 °C ASTM D152

首页 橡塑 / 热塑性弹性体 / TPU
相关产品
店内推荐
首页
店铺
拨打电话 立即报价
发送询价单
采购商品:
采购数量:
联系信息:
公司名称:
采购说明:
 
您的询盘第一时间将不发送给其他供应商,但该供应商24 小时未响应情况下,仍将为您分配更合适供应商
图形验证:
图形验证码 换一换
验证码校验