上海菱联自动化控制技术有限公司
W3GZ50-CB02-35轴流风机一个理念，无限可能。
依必安派特轴流风机可真正节省空间，并在各种不同的设备和系统中进行冷热空气交换。轴流风机的杰出特点包括安装深度浅、噪音低、效率高，尤其适合通过热交换器输送空气。
轴流风机的作用类似于螺旋桨，空气输送的方式为轴进轴出。依必安派特外转子电机直接集成在叶轮中，形成一个紧凑的轴流风机单元。根据安装情况不同，可以选择不同厚度的风圈。
依必安派特绿色科技EC技术、智能传感器和控制电子的巧妙结合，使风机为各大行业提供智能的解决方案。无论是状态监测、远程维护还是发生堵塞时的自动调速，客户都可以从依必安派特获得支持，尊享定制化的 "绿色智能" 解决方案。
依必安派特轴流风机优势一览：
●设计紧凑
●可选绿色科技EC技术或AC技术
●多种产品尺寸及性能可选
●叶轮经过空气动力学优化设计，有效地提升效率和降低噪音
●绿色科技EC技术、控制功能与传感器信号集成于一体的高效节能的轴流风机
●可选配不同的网罩、导流栅和风圈
●动平衡根据DIN ISO 1940标准
●通过VDE、UL、CSA、CE和GOST等众多认证
●应用领域：通风、制冷、空调、汽车、风力发电和机械/设备行业
技术参数
| Weight | 121 kg |
|---|---|
| Motor size | 200 |
| Size | 1250 mm |
| Rotor surface | Painted black |
| Electronics housing material | Die-cast aluminum, painted black |
| Blade material | Die-cast aluminum, painted black |
| Support ring material | Steel, galvanized and coated with black plastic (RAL 9005) |
| Fan housing material | Sheet steel, galvanized and coated with black plastic (RAL 9005) |
| Number of blades | 5 |
| Blade pitch | 0° |
| Airflow direction | A |
| Direction of rotation | Counterclockwise, viewed toward rotor |
| Degree of protection | IP54 |
| Insulation class | "F" |
| Moisture (F) / Environmental (H) protection class | H2+C |
| Max. permitted ambient temp. for motor (transport/storage) | +80 °C |
| Min. permitted ambient temp. for motor (transport/storage) | -40 °C |
| Installation position | Shaft horizontal or rotor on top |
| Condensation drainage holes | On stator side |
| Mode | S1 |
| Motor bearing | Ball bearing |
| Technical features | - Output 10 VDC, max. 10 mA - Output 20 VDC, max. 50 mA - Output for slave 0-10 V - Input for sensor 0-10 V or 4-20 mA - External 24 V input (parameter setting) - External release input - Alarm relay - Integrated PID controller - Motor current limitation - PFC, passive - RS-485 MODBUS-RTU - Soft start - EEPROM write cycles: 100,000 maximum - Control input 0-10 VDC / PWM - Control interface with SELV potential safely disconnected from the mains - Thermal overload protection for electronics/motor - Line undervoltage / phase failure detection |
| Touch current according to IEC 60990 (measuring circuit Fig. 4, TN system) | <= 3,5 mA |
| Electrical hookup | Terminal box |
| Motor protection | Reverse polarity and locked-rotor protection |
| Protection class | I (with customer connection of protective earth) |
| Conformity with standards | EN 61800-5-1 / CE |
| Approval | UL 1004-7 + 60730-1 / EAC / CSA C22.2 No. 77 + CAN/CSA-E60730-1 |
数据符合ErP指令
| 安装类别 | A |
|---|---|
| 效率类别 | static |
| 闭环速度控制 | ja |
| 比率* | 1 |
| *比率 = 1 + psf / 100 000 | |
| 实际值 | 请求 2015 | ||
|---|---|---|---|
| 整体效率 ηe | 45,4 | 37,4 | |
| 效率等级 N | 48 | 40 | |
| 输入功率 Pe | KW | 3,87 | |
| qV | m3/h | 40145 | |
| 压力 total | Pa | 151 | |
| 速度 n | |
650 | |
| Data established at point of optimum efficiency | |||
额定数据
| Phase | 3~ | |
|---|---|---|
| Type of voltage | AC | |
| Nominal voltage | in V | 400 |
| Nominal voltage range | in V | 380 .. 480 |
| Frequency | in Hz | 50/60 |
| Type of data definition | maximum load | |
| Speed | in min-1 | 645 |
| Power input | in W | 4100 |
| Current draw | in A | 6,5 |
| Max. back pressure | in Pa | 180 |
| Min. ambient temperature | in °C | -25 |
| Max. ambient temperature | in °C | 60 |
曲线
Air flow 50 Hz
测量值
| n | Pe | I | LpAin | |
|---|---|---|---|---|
| 单位 min-1 | 单位 W | 单位 A | 单位 dB(A) | |
| 1 | 645 | 2692 | 4,64 | 72 |
| 10 | 440 | 995 | 1,68 | 61 |
| 11 | 440 | 1131 | 1,88 | 62 |
| 12 | 440 | 1319 | 2,17 | 67 |
| 13 | 340 | 384 | 0,66 | 55 |
| 14 | 340 | 459 | 0,77 | 54 |
| 15 | 340 | 522 | 0,87 | 55 |
| 16 | 340 | 608 | 1,00 | 60 |
| 2 | 645 | 3166 | 5,33 | 70 |
| 3 | 645 | 3614 | 6,01 | 72 |
| 4 | 645 | 4100 | 6,5 | 77 |
| 5 | 540 | 1538 | 2,65 | 67 |
| 6 | 540 | 1840 | 3,10 | 66 |
| 7 | 540 | 2091 | 3,47 | 67 |
| 8 | 540 | 2437 | 4,00 | 72 |
| 9 | 440 | 832 | 1,43 | 62 |
产品图纸
| 1 | Direction of air flow "A" |
| 2 | Cable diameter min. 4 mm, max. 10 mm, tightening torque 4 ± 0.6 Nm |
| 3 | Cable diameter min. 9 mm, max. 16 mm, tightening torque 6 ± 0.9 Nm |
| 4 | Tightening torque 3.5 ± 0.5 Nm |
| 5 | Mounting holes for AxiTop |
