公司简介

我厂位于连霍高速巩义东出口处，东约500米。是生产各种薯类产品的厂家。我厂生产的薯类淀粉加工设备，具有经久耐用、动力小、效率高，省电、省力、用人少，生产加工成本低，对县、乡、村集体和个人都适用。多年来，我厂产品畅销全国各地，深受广大用户好评。

Company profile

I plant is located in Lianhuo highway Gongyi east exit, about 500 meters east. Is the production of various potato products m anufacturers. The potato starch processing equipment produced by our factory has the advantages of durability, sm all power, high efficiency, power saving, labor-saving, less employing, and low production and processing cost, which is applicable to the county, township, village collective and individual. Over the years, our products sell well all over the country and are well received by the m ajority of users.

淀粉机优势：

1：粉碎部分采用刺条式齿辊，抛弃以往手工冲刺方法。

2：钢刺齿寿命是以往刺齿寿命三倍，并且磨损以后更换十分方便简单。

淀粉机性能和技术参数：

1、全封闭机体，无漏水、漏渣、漏浆现象.
2、整机稳定性能好，噪音低。
3、可一次完成渣、浆分离，淀粉纯净，渣内不含渣皮、渣块、丁状物。
4、节约耗材，自动进薯、破碎、分离、排浆、排渣。
5、刺辊带水工作，缩短了渣粉浆空气中的氧化反应，提高淀粉纯白度。

6、浆渣分离度98以上，残渣含粉率2左右.

Advantages of starch m achine:

1: In the crushing part, the prick bar toothed roller is used instead of the previous m anual sprint method.

2: The service life of the steel thorn teeth is three times of that of the former ones, and it is very convenient and s i m p l e to replace them after wear.

Perform ance and technical para meters of starch m achine:

1. Fully enclosed body, no water leakage, slag leakage, slurry leakage

2. The whole m achine has good stability and low noise.

3. It can complete the separation of slag and pulp at one time, the starch is pure, and there is no slag skin, slag block and sm all substance in the slag.

4. Saving consum ables, aut o m atic feeding, crushing, separation, slurry discharge, slag discharge.

5. The air oxidation reaction of slag slurry was shortened and the whiteness of starch was improved.

6. The separation degree of pulp and slag is above 98 and the powder content of residue is about 2

华升机械鲜薯淀粉机采用先进的刺条式刨丝机构，本刺辊刺条采用国际工艺定制生产专用齿条。高耐磨、刺齿锋利，加工出的粉渣均匀细腻，淀粉提取率更高。更换齿条方便快捷，大大减少了人工的劳动强度，生产效率大幅度提高。淀粉机将鲜薯通过高速旋转的鲜薯刨成细丝状，无块状、皮丁，且碎渣少，不堵塞过滤网，有利于淀粉的提取，提高了淀粉提取率，且色好，同时钉刺锋利耐磨。

欢迎来电咨询或到厂考察试机，联系电话13014610088