microEnable 5 ironman ACX-SP是一款PCIe图像采集设备,可连接一台CoaXPress相机,带宽为25 Gbit/s
microEnable 5 ironman ACX-SP专门用于高速图像采集,可连接1台CoaXPress相机,并提供DMA1800技术,提供机器视觉应用
- 支持CoaXPress相机输入
- 可轻松配置软件
- 高性能的图像采集功能
- 针对工业用途的单链路CoaXPress相机进行优化
- DMA 1800 / 高达1800 MB/s的PCIe数据带宽(PCIe x4 Gen2)
- 支持通过前端I/O传输光电解耦(opto-decoupled)信号
- 广泛支持第三方软件接口
- 多样化的应用和行业用途
- 灵活和可扩展的型号系列
- 可通过CoaXPress接口进行供电
文章详情
|
|
型号名称 |
microEnable 5 marathon ACX-SP |
|
类别 |
图像采集卡 |
设备功能
|
|
处理器 |
System Processor |
|
板载内存 |
1 GByte DDR3-RAM |
相机接口
|
|
标准 |
CoaXPress 1.0/1.1 |
|
配置 |
CXP1-6; 1 camera |
|
接头 |
1 x DIN 1.0/2.3 |
|
功率输出 |
SafePower, Power over CXP 13W/24V per cable |
|
相机支持 |
line scan camera, area scan camera |
|
芯片类型 |
CFA sensor (Bayer), Grayscale sensor, RGB sensor |
|
位深 |
8-16-bit (grayscale), 24-48-bit (color) |
|
数据带宽 |
1 x 6,25 Gbit/s |
|
测试环境 |
Camera Simulator |
主机PC接口
|
|
PC总线接口 |
PCI Express x4 (Gen 2), DMA1800 |
|
PC总线接口性能 |
up to 1.800 MB/s (sustainable) |
控件和通用I/O
|
|
板载GPIO接口 |
4 opto-coupled outputs (4,5V - 28V), 4 opto-coupled inputs (4,5V - 28V), optional 2 opto-coupled differential inputs (RS422), Shaft encoder input, programmable rescaler, multiple-camera synchronization |
|
板载前端GPIO接口 |
2 opto-coupled differential inputs (RS422) and 1 opto-coupled differential / single ended input, optional (conf.): 4 opto-coupled Inputs (4,5V - 28V) with up to 1 MHz frequency, RS485 interface (PLC connection) scheduled, Shaft encoder input, programmable rescaler: multiple-camera synchronization, 2 TTL outputs, up to 20 MHz frequency |
|
GPIO同步和控制 |
Configurable Trigger System supporting several trigger modes (grabber controlled, external trigger, gated, software trigger) and shaft encoder functionality with backward compensation, Multi-Camera-Synchronization |
|
GPIO接口概述 |
8in/8out (max.), TTL or opto-coupled |
处理功能
|
|
基本功能 |
Offset/Gain/Gamma correction, Invert, ROI, White Balance, Mirroring, Image Selector, LUT |
物理和环境信息
|
|
尺寸 |
PCIe Standard height, half length card: 167.64 mm length x 111.15 mm height |
|
功耗/电源 |
typ. 0.8 A @ 12V (actual values depend on image pre-processing) |
|
操作温度 |
50° (0 LFM*), 60° (100 LFM) FPGA operating temperature: 0°C to 85°C |
|
存储温度 |
-50°C up to 80°C |
|
相对湿度(操作、存储) |
5% - 90% non-condensing (operating), 0% - 95% (storage) |
|
MTBF |
pending |
|
合规 |
WEEE, RoHS, REACH |
软件
|
|
软件驱动程序 |
Windows 10 / 8 / 7 (32-Bit), Windows 10 / 8 / 7 (64-Bit) |
|
软件工具 |
microDisplay (Acquisition control and viewer), GenICam Explorer (Camera configuration tool), microDiagnostics (Service tool), Device Drivers, SDK, Documentation |
|
软件API |
Silicon Software SDK, .net interface |
|
FPGA编程 |
not programmable |
|
BV-软件兼容性 |
Halcon, Common Vision Blox, others on request |