microEnable 5 marathon AF2是一款PCIe图像采集设备,可通过光纤连接两台Camera Link HS标准的相机
microEnable 5 marathon AF2专门用于高速图像采集,可连接2台Camera Link HS相机,并提供DMA1800技术和光学连接器,能获得机器视觉应用
- 可支持光纤线材的Camera Link HS F2图像采集卡
- 双路1200 MB/s F2光纤300米距离接口(SFP连接器)
- 支持面阵相机和线阵相机
- 集成电路元件:“多相机/单图像采集卡”和“单相机/多图像采集卡”
- DMA1800 / 高达1800 MB/s的PCIe数据带宽(PCIe x4 Gen2)
- 配备光耦前端GPIO,4.5 – 28V,TTL输出,RS 485接口
- 内置GPIO – 接口可支持附加的GPIO板(需要额外的插槽)
- 兼容Silicon Software SDK以及GUI控制和服务工具
- 灵活和可扩展的型号系列
- 由AIA提供的IP内核可确保兼容互通,缩短开发时间
文章详情
|
|
型号名称 |
microEnable 5 marathon AF2 |
|
类别 |
图像采集卡 |
设备功能
|
|
处理器 |
System Processor |
|
板载内存 |
512 MByte DDR3-RAM |
相机接口
|
|
标准 |
Camera Link HS |
|
配置 |
Dual CLHS F2, Single CLHS F2 |
|
接头 |
2 x SFP |
|
相机支持 |
line scan camera, area scan camera |
|
芯片类型 |
Grayscale sensor |
|
位深 |
any - output as raw data, 8-16-bit (grayscale) |
|
数据带宽 |
2 x 10 Gbit/s |
|
测试环境 |
Camera Simulator |
主机PC接口
|
|
PC总线接口 |
PCI Express x4 (Gen 2), DMA1800 |
|
PC总线接口性能 |
up to 1.800 MB/s (sustainable) |
控件和通用I/O
|
|
板载GPIO接口 |
4 opto-coupled outputs (4,5V - 28V), One 34-pin flat cable connector onboard: 4 opto-coupled inputs (4,5V - 28V), optional 2 opto-coupled differential inputs (RS422), Shaft encoder input, programmable rescaler, multiple-camera synchronization |
|
板载前端GPIO接口 |
One 15-pin D-Sub socket: 2 opto-coupled differential inputs (RS422) and 1 opto-coupled differential / single ended input, Shaft encoder input, programmable rescaler: multiple-camera synchronization, optional (conf.): 4 opto-coupled Inputs (4,5V - 28V) with up to 1 MHz frequency, 2 TTL outputs, up to 20 MHz frequency |
|
GPIO同步和控制 |
Configurable Trigger System supporting several trigger modes (grabber controlled, external trigger, gated, software trigger) and shaft encoder functionality with backward compensation, Multi-Camera-Synchronization |
|
GPIO接口概述 |
onboard: 8in/8out (max.), TTL or opto-coupled |
处理功能
物理和环境信息
|
|
尺寸 |
PCIe Standard height, half length card: 167.64 mm length x 111.15 mm height |
|
重量(典型值) |
150 g |
|
功耗/电源 |
typ. 1A @ 12V (actual values depend on image pre-processing) |
|
操作温度 |
50° (0 LFM*), 60° (100 LFM*) FPGA operating temperature: 0°C to 85°C, *LFM = Linear Feet per Minute, unit for measuring airflow velocity |
|
存储温度 |
-50°C up to 80°C |
|
相对湿度(操作、存储) |
5% - 90% non-condensing (operating), 0% - 95% (storage) |
|
MTBF |
pending |
|
合规 |
WEEE, RoHS, REACH |
软件
|
|
软件驱动程序 |
Windows 10 / 8 / 7 (32-Bit), Windows 10 / 8 / 7 (64-Bit) |
|
软件工具 |
microDisplay (Acquisition control and viewer), GenICam Explorer (Camera configuration tool), microDiagnostics (Service tool), Device Drivers, SDK, Documentation |
|
软件API |
Silicon Software SDK, .net interface |
|
FPGA编程 |
not programmable |
|
BV-软件兼容性 |
Halcon, Common Vision Blox, others on request |