杭州微图视觉科技有限公司
microEnable 5 marathon deepVCL是一款PCIe图像处理设备,可连接任意两台Camera Link标准规格的相机。
microEnable 5 marathon deepVCL是为VisualApplets的深度学习应用提供的高速图像处理解决方案。
-
为深度学习技术实现实时的图像处理
-
兼容VisualApplets CNN算子
-
板载图像处理功能
-
适用于工业领域的多设备、多相机支持
-
DMA1800 / 高达1800 MB/s的PCIe数据带宽(PCIe x4 Gen2)
-
支持通过前端I/O传输光电解耦(opto-decoupled)信号
-
广泛支持第三方软件接口
-
多样化的应用和行业用途
-
可利用支持Xilinx Kintex FPGA的VisualApplets来定制FPGA编程
-
PoCL SafePower供电。
microEnable 5 marathon deepVCL是为VisualApplets的深度学习应用提供的高速图像处理解决方案。
-
为深度学习技术实现实时的图像处理
-
兼容VisualApplets CNN算子
-
板载图像处理功能
-
适用于工业领域的多设备、多相机支持
-
DMA1800 / 高达1800 MB/s的PCIe数据带宽(PCIe x4 Gen2)
-
支持通过前端I/O传输光电解耦(opto-decoupled)信号
-
广泛支持第三方软件接口
-
多样化的应用和行业用途
-
可利用支持Xilinx Kintex FPGA的VisualApplets来定制FPGA编程
-
PoCL SafePower供电。
文章详情 |
||
---|---|---|
项目编号 | 108094 | |
配件类型 | 图像采集卡 | |
品牌 | Basler | |
型号名称 | microEnable 5 marathon deepVCL | |
产品线 | V-Line | |
Framegrabber Series | ||
类别 | 图像采集卡 |
设备功能 |
||
---|---|---|
处理器 | Vision Processor | |
板载内存 | 2 GByte DDR3-RAM |
相机接口 |
||
---|---|---|
标准 | Camera Link 2.0 | |
配置 | CL-full, CL-medium, CL-dual base, CL-base, CL-deca (80bit) | |
接头 | 2 x SDR26 (miniCL) | |
功率输出 | PoCL SafePower, 4W/12V per cable | |
相机支持 | line scan camera, area scan camera | |
芯片类型 | CFA sensor (Bayer), Grayscale sensor, RGB sensor | |
位深 | 8-16-bit (grayscale), 24-48-bit (color) | |
数据带宽 | 850 MB/s | |
测试环境 | Camera Simulator |
主机PC接口 |
||
---|---|---|
PC总线接口 | PCI Express x4 (Gen 2), DMA1800 | |
PC总线接口性能 | up to 1.800 MB/s (sustainable) |
控件和通用I/O |
||
---|---|---|
板载GPIO接口 | 4 opto-coupled outputs (4,5V - 28V), 4 opto-coupled inputs (4,5V - 28V), optional 2 opto-coupled differential inputs (RS422), Shaft encoder input, programmable rescaler, multiple-camera synchronization | |
板载前端GPIO接口 | 2 opto-coupled differential inputs (RS422) and 1 opto-coupled differential / single ended input, optional (conf.): 4 opto-coupled Inputs (4,5V - 28V) with up to 1 MHz frequency, RS485 interface (PLC connection) scheduled, Shaft encoder input, programmable rescaler: multiple-camera synchronization, 2 TTL outputs, up to 20 MHz frequency | |
GPIO同步和控制 | Configurable Trigger System supporting several trigger modes (grabber controlled, external trigger, gated, software trigger) and shaft encoder functionality with backward compensation, Multi-Camera-Synchronization | |
GPIO接口概述 | onboard: 8in/8out (max.), TTL or opto-coupled, Front GPIO: up to 3 differential signals in, up to 4 single-ended signals in (depends on configuration), 2 TTL outputs |
处理功能 |
||
---|---|---|
基本功能 | Tap Sorting (Sensor Readout Correction), Offset/Gain/Gamma correction, Invert, ROI, Image Selector, LUT |
物理和环境信息 |
||
---|---|---|
尺寸 | PCIe Standard height, half length card: 167.64 mm length x 111.15 mm height | |
重量(典型值) | 165 g | |
功耗/电源 | 12 V, 1.4 A (actual values depend on processing) | |
操作温度 | 50° (0 LFM*), 60° (100 LFM*) FPGA operating temperature: 0°C to 85°C, *LFM = Linear Feet per Minute, unit for measuring airflow velocity | |
存储温度 | -50°C up to 80°C | |
相对湿度(操作、存储) | 5%-90% non-condensing (operating), 0%-95% (storage) | |
MTBF | pending | |
合规 | WEEE, RoHS, REACH |
软件 |
||
---|---|---|
软件驱动程序 | Windows 10 / 8 / 7 (32-Bit), Windows 10 / 8 / 7 (64-Bit), Linux 32-Bit, Linux 64-Bit | |
软件工具 | microDisplay (Acquisition control and viewer), GenICam Explorer (Camera configuration tool), microDiagnostics (Service tool), Device Drivers, SDK, Documentation | |
软件API | Silicon Software SDK, .net interface | |
FPGA编程 | VisualApplets | |
BV-软件兼容性 | Halcon, Common Vision Blox, others on request |