河北恒仪电子科技有限公司
产品名称: 高水位报警器
型号系列:WA400
品牌:global water
产地:美国
价格:**终成交价格需联系客服
Global Water 的 WA400 水位报警器坚固耐用，易于安装在任何需要可靠的高水位或低水位报警器的地方。
美国global water高水位报警器WA400概述
特征
? 耐候外壳
? 用于独立应用的自供电型号
? 明亮的频闪灯和响亮的发声器
? 易于安装在任何地方
? 坚固可靠
? 选择**适合您应用的电源选项
? 与我们的水检测传感器完美集成，浮子开关和控制器
WA400 具有适用于户外应用的耐候 PVC 外壳、明亮的频闪灯和用于警报通知的响亮发声器，以及多种版本和配件可供选择。
适用于您的应用程序
的选项 WA400-DC 电池供电版本可以快速部署在临时紧急应用程序中或在没有交流电源的情况下需要液位警报的任何地方。该装置将在其八节标准 1.5 伏 AA 电池上发出长达 12 小时的频闪和声音。
WA400-AC 外部供电版本允许您将警报与水位传感器、任何标准浮子开关或任何触点闭合一起使用。除了标准交流电源外，我们的 WA400-BU 版本还包括自动备用电池 - 如果您的交流电源可能不可靠，这是一个很棒的功能。
附件增强
我们坚固的 WA600 水位报警传感器为 WA400-AC 装置提供高低水位检测功能。（请注意，WA600 传感器不应与 WA400-DC 型号一起使用。）我们专门设计的 WA100 液位浮球开关结构紧凑，自重，安装快捷方便，适用于任何 WA400 装置。此外，WA100 可配置为 NO（常开）高电平驱动或 NC（常闭）低电平驱动。
WA400 液位报警器也可用于其他设备，例如我们的 PC320 控制器，或任何具有干接点开关输出的设备，包括采样器、泵面板和安全开关。
美国global water高水位报警器WA400规格
中文内容来自机器翻译，内容仅供参考，实际内容可参考原厂介绍或以合同为准。
英文原文：
Global Water’s WA400 Water Level Alarm is robust and easy to install anywhere you need a reliable high or low water level alarm.
Overview
FEATURES
? Weather resistant housing
? Self-powered model for stand-alone applications
? Bright strobe and loud sounder
? Easy to install just about anywhere
? Robust and reliable
? Choose the power option that best suits your application
? Integrates well with our water detection sensors, float switches, and controllers
The WA400 features a weather resistant PVC enclosure for outdoor applications, a bright flashing strobe light and loud sounder for alarm notification, and a choice of versions and accessories.
Options for your Applications
The WA400-DC battery powered version may be quickly deployed in temporary emergency applications or anywhere you need a level alarm where no AC power is available. The unit will strobe and sound for up to 12 hours on its eight standard 1.5 volt AA batteries.
The WA400-AC externally powered version allows you to the use the alarm with water level sensors, any standard float switch, or any contact closure. Our WA400-BU version includes an automatic battery backup in addition to standard AC power- a great feature if your AC power source may be unreliable.
Augment with Accessories
Our rugged WA600 Water Alarm Sensors provide high and low water level detection capabilities for the WA400-AC unit. (Please note that the WA600 sensor should not be used with the WA400-DC model.) Our specially designed WA100 liquid level float switch is compact and selfweighted for quick and easy installation, and it works on any of the WA400 units. Also, the WA100 may be configured for NO (normally open) high level actuation or NC (normally closed) low level actuation.
The WA400 Level Alarms may also be used on other equipment such as our PC320 controller, or any device that has a dry contact switch output including samplers, pump panels, and security switches.
Specifications
