摆线车轮马达是用来驱动车辆行走的马达，一般的形式是连接法兰止口位于马达的中间部位。

产品特点：

1、它采用定转子副设计，具有高效率。

2、车轮液压马达径向轴承可承受高径向力。

3、可靠的轴端密封设计，能承受高压，可串联和并联使用。

4、正反转换向方便、转速平稳。

 

摆线马达能不能承受径向力？

答案是肯定的，摆线马达是可以承受径向力的。轴配油的马达输出轴上用的是深沟球轴承或角接触轴承，而盘配油马达用的是一对圆锥滚子轴承，可以承受较大的径向力。

而有些公司生产的马达特别是小型马达使用的轴承是平面滚针轴承，这种马达是不能承受径向力的，所以在订货时一定要问清楚，否则马达容易损坏。但是摆线马达承受的径向力不是无限的，应该按下图表来查询。这个图表只是车轮马达中的一种，其余车轮马达在样本上查询。

标准摆线马达能够直接驱动车轮吗？

既然马达可以承受径向力，那么标准摆线马达（即不是车轮马达）也可以直接驱动链轮、齿轮、车轮、滚筒等传动机构。像一些小型的挖掘机底盘行走驱动就是用的摆线马达直接驱动履带。扫雪车的滚刷也是用的车轮马达。

 

 

The cycloidal wheel motor is used to drive the motor of the vehicle. The general form is to connect the flange stop to the middle part of the motor.

Product features:

1. It adopts the design of rotor, which is efficient.

2. Radial bearing of wheel hydraulic motor can withstand high radial force.

3. Reliable shaft seal design, can withstand high voltage, can be connected in series and parallel.

4. Positive and negative conversion to convenient and stable speed.

Can a cycloidal motor bear the radial force?

The answer is yes, the cycloidal motor can withstand the radial force. The motor output shaft of shaft distribution oil is used with deep groove ball bearing or Angle contact bearing, while the disc oil motor USES a pair of tapered roller bearings which can withstand greater radial force.

And some of the company's production of motor especially small motor used in bearing flat needle roller bearing, the motor can't bear radial force, so be sure to ask when the order, otherwise, the motor is easy to damage. But the radial force of the cycloidal motor is not infinite and should be checked by the chart. This diagram is just one of the wheel motors, and the rest of the wheel motors are on the sample.

Can the standard cycloidal motor drive the wheels directly?

Since the motor can withstand the radial force, the standard cycloidal motor (that is, not the wheel motor) can also directly drive the chain wheel, gear, wheel, roller and other transmission mechanism. Like some small excavator chassis walking drive is the use of the cycloidal motor driving the track directly. The rolling brush is also used as a wheel motor.