东莞市常平平治塑胶原料贸易行
Hostaform MT SlideX 1203
Tribological modified
Hostaform MT SlideX 1203 is a standard flow injection molding grade with tribological modification designed for use in demanding applications that require prevention of audible noise caused by stick-slip phenomenon and low friction and wear against plastics and metals. Hostaform?? MT? SlideX?? 1203 is a special grade developed for medical industry applications and complies with: CFR 21 (177.2470) of the Food and Drug Administration (FDA) and is listed in the Drug Master File (DMF 11559) and the Device Master File (MAF 1079) the corresponding EU and national registry regulatory requirements biocompatibility in tests corresponding to USP Class VI/ISO 10993 low residual monomers no animal-derived constituents
Hostaform MT SlideX 1203 is a standard flow injection molding grade with tribological modification designed for use in demanding applications that require prevention of audible noise caused by stick-slip phenomenon and low friction and wear against plastics and metals. Hostaform?? MT? SlideX?? 1203 is a special grade developed for medical industry applications and complies with: CFR 21 (177.2470) of the Food and Drug Administration (FDA) and is listed in the Drug Master File (DMF 11559) and the Device Master File (MAF 1079) the corresponding EU and national registry regulatory requirements biocompatibility in tests corresponding to USP Class VI/ISO 10993 low residual monomers no animal-derived constituents
总览 | |
材料状态 |
已商用:当前有效
|
资料1 | |
搜索 UL 黄卡 | |
供货地区 |
北美洲
非洲和中东
拉丁美洲
欧洲
亚太地区
|
特性 |
低摩擦系数
耐磨损性,良好
|
用途 |
医疗/护理用品
医疗器械
|
机构评级 |
ISO 10993
USP 第VI类
|
形式 |
颗粒
|
加工方法 |
注射成型
|
多点数据 |
Isothermal Stress vs. Strain (ISO 11403)
Secant Modulus vs. Strain (ISO 11403)
|
物理性能 |
额定值
|
单位制
|
测试方法
|
密度 |
1.40
|
g/cm3
|
ISO 1183 |
熔融体积流量(MVR)(190°C/2.16 kg) |
13
|
cm3/10min
|
ISO 1133 |
收缩率 | ISO 294-4 | ||
垂直 |
1.6
|
%
|
|
流动 |
2.0
|
%
|
|
吸水率 | ISO 62 | ||
饱和, 23°C, 2.00 mm |
0.60
|
%
|
|
平衡, 23°C, 2.00 mm, 50% RH |
0.20
|
%
|
机械性能 |
额定值
|
单位制
|
测试方法
|
拉伸模量 |
2650
|
MPa
|
ISO 527-1 |
拉伸应力(屈服) |
58.0
|
MPa
|
ISO 527-2/50 |
拉伸应变(屈服) |
12
|
%
|
ISO 527-2/50 |
标称拉伸断裂应变 |
45
|
%
|
ISO 527-2 |
弯曲模量 |
2500
|
MPa
|
ISO 178 |