东莞市常平平治塑胶原料贸易行
Product Information Ultramid
A 60G1 V30 NATURAL
10/2020
PA66-GF30 FR(40)
BASF SE
67056 Ludwigshafen, Germany
Product description
Ultramid A 60G1 V30 Natural is a polyamide 66 based on a non-halogenated flame retardant system, reinforced with
30% of glass fiber, heat stabilized, for injection moulding. This grade offers excellent flame retardancy properties (UL 94,
5VA, GWIT) combined with excellent processing, mechanical and electrical performance. It can withstand temperatures of
160°C for over 6000 hours and has a UL F1 rating for weatherability resistance.
1% wt Loss (TGA) - NF F16-101 I3; European Railways Certifications - EN 45545-2 HL3; European Railways
Certifications - EN 45545-2 HL3
聚酰胺66是一种基于非卤化阻燃体系的聚酰胺66，由30% 的玻璃纤维增强，热稳定，用于注塑成型。这一级别提供了优异的阻燃性能(UL 94,5 VA，GWIT)与优异的加工，机械和电气性能相结合。它可以承受160 ° C 的温度超过6000小时，并具有 UL F1的耐候性评级。1% wt 丢失(TGA)-NF F16-101 I3; 欧洲铁路认证 -EN 45545-2 HL3; 欧洲铁路认证 -EN 45545-2 HL3
Injection Notes
The material is supplied in airtight bags, ready for use. In case that the virgin material has absorbed moisture, it must be
dried with a dehumidified air drying equipment, dew Point mini -20°C. Recommended time 2-4h.
Injection Advice:
? All reinforced, flame retardant compounds generate some level of abrasion/corrosion to the steel processing equipment.
These issues may be magnified by using incorrect processing conditions (temperatures, residence time, moisture level ...)
during the moulding process. Therefore, BASF SE recommends you adhere to the processing conditions detailed in this
technical data sheet. For equipment that comes into contact with molten flame retardant compounds, BASF SE advises
you to use a steel with high chromium and high carbon content (having a minimum concentration of 16% Chromium) to
prevent corrosion and abrasion. For the correct reference of steel associated to flame retardant compounds' processing,
please refer to your equipment manufacturers. In the case of high requirements on surface quality a mould temperature of
up to 120°C can be considered.
? The processing parameters like processing temperatures are a recommendation and can be adjusted in function of
injection machine size, part geometry / design.
Disclaimer
The information contained in this document is given in good faith based on our current knowledge. lt is only an indication
and it is in no way binding. This information must on no account be used as a substitutive for necessary prior tests which
alone can ensure that a product is suitable for a given use. ANY WARRANTY OF PRODUCT PERFORMANCE,
MERCHANDABILITY OR FITNESS FOR A PARTICULAR PURPOSE IS EXPRESSLY EXCLUDED. Users are responsible
for ensuring compliance with local legislation and for obtaining the necessary certifications and authorizations. Users are
requested to check that they are in possession of the latest version of this document, and BASF SE is at their disposal to
supply any additional information.
Safety Information
Detailed information regarding safety are available on the safety data sheet (MSDS). MSDS is sent with the first material
order or available by contacting our customer services
Regulations Compliance
This product is not intended to be used for the following regulated market: food contact, drinking water, toys, cosmetics or
medical devices.
This grade complies with RoHS Directive 2011/65/EU, 2015/863 and local regulations as amended.
Grades produced or imported in Europe comply with REACH directive 1907/2006/EC as amended
