1.NCF2000 Technical specifications:

Appearance: Light yellow or yellow transparent liquid;

Solid content:≤5%；

Boiling range:78-126℃

Specific gravity:0.802±0.005g/cm3 (20℃)；

Corrosive: regular;

Halogen :free

2.NCF2000 Precautions:

It is strictly prohibited to mix with other types of fluxes and thinners, and must

be cleaned as required for military products and life medicine electronic products.

When used in a closed spray welding, it may not be necessary to add a diluent. When

used for foam welding, thinner should be added, and the used flux should be

discharged every week and replaced with new products. For severely oxidized PC

boards or lead pins, it is recommended to adjust the spray amount and foam height

reasonably before soldering, so that the flux can be evenly distributed on the PC board.

For PC boards with IC sockets, the amount of flux applied must be particularly

carefully adjusted. It is recommended that the spray tank be cleaned once a week, the

nozzle should be cleaned before or after get off work every day, and the foaming tank

should be cleaned once a week.

3.NCF2000 Main ingredients:

low-carbon alcohol solvents, active agents, co-solvents, stabilizers, etc.

4.NCF2000 Storage and packaging:

This product is flammable and should be kept away from fire sources, sealed in a

dry and ventilated place, and to prevent static electricity. The packaging is a 25-liter

plastic drum or other packaging methods.