东莞市崀峰塑胶原料有限公司
Lustran? ABS 448
Acrylonitrile Butadiene Styrene
INEOS ABS (USA)
产品说明：
Lustran ABS 448 resin is a high-gloss, high-impact injection molding grade of ABS (acrylonitrile butadiene styrene). In addition to a good balance of physical properties, it provides heat stability and very good moldability.
Lustran ABS 448 is tougher than Lustran ABS 248 resin. It is used in home appliances for floor care housings, vacuum cleaner housings, and kitchen electrical appliance housings; lawn and garden equipment; and power tool housings. As with any product, use of Lustran ABS 448 resin in a given application must be tested (including but not limited to field testing) in advance by the user to determine suitability.
Lustran ABS 448 is tougher than Lustran ABS 248 resin. It is used in home appliances for floor care housings, vacuum cleaner housings, and kitchen electrical appliance housings; lawn and garden equipment; and power tool housings. As with any product, use of Lustran ABS 448 resin in a given application must be tested (including but not limited to field testing) in advance by the user to determine suitability.
物性信息：
| 基本信息 | |
|---|---|
| 黄卡编号 | |
| 特性 |
|
| 用途 |
|
| 机构评级 |
|
| 外观 |
|
| 形式 |
|
| 加工方法 |
|
| 多点数据 |
|
| 物理性能 | 额定值 | 单位制 | 测试方法 |
|---|---|---|---|
| 比重 | 1.05 | g/cm3 | ASTM D792 |
| 特定体积 | 0.950 | cm3/g | ASTM D792 |
| 熔流率（熔体流动速率） | ASTM D1238 | ||
| 220°C/10.0 kg | 12 | g/10 min | ASTM D1238 |
| 230°C/3.8 kg | 4.5 | g/10 min | ASTM D1238 |
| 收缩率 - 流动 | 0.40 到 0.60 | % | ASTM D955 |
