东莞市天扬塑胶原料有限公司
产品描述 Product Description
用途:相机应用;镜头;电气/电子应用领域;光学应用;医用包装;电子绝缘;
颜色:清晰/透明
加工条件:注射成型Injection Molding
性能特点: 低吸湿性; 尺寸稳定性好; 共聚物; 耐化学性; 耐高温; 高纯度; 电气性好; 光学性能; 低密度; High purity,Good Dimensional Stability,Good Electrical Properties,Optical performance,High Heat Resistance,Low density,Copolymer,Solvent resistance,Low moisture absorption
技术参数 Technical Data | |||
---|---|---|---|
|
额定值Nominal Value | 单位Units | 测试方法Test Method |
密度Specific Gravity | 1.01 | g/cm3 | ASTM D792 |
熔体质量流动速率熔体质量流动速率 | |
|
|
280℃,2.16kg280℃/2.16 kg | 25 | g/10min | JIS K6719 |
吸水率吸水率 | |
|
|
平衡平衡 | 0.010 | % | ASTM D570 |
|
额定值Nominal Value | 单位Units | 测试方法Test Method |
拉伸模量Tensile Modulus | 2500 | MPa | ISO 527-2 |
拉伸强度Tensile Stress | 71.0 | MPa | ISO 527-2 |
拉伸应变拉伸应变 | |
|
|
断裂断裂 | 10 | % | ISO 527-2 |
弯曲模量Flexural Modulus | 2500 | MPa | ISO 178 |
|
额定值Nominal Value | 单位Units | 测试方法Test Method |
悬臂梁缺口冲击强度Notched Izod Impact Strength | 21 | J/m | ASTM D256 |
|
额定值Nominal Value | 单位Units | 测试方法Test Method |
玻璃化转变温度Glass Transition Temperature | 139 | ℃ | JIS K7121 |
线性热膨胀系数线性热膨胀系数 | |
|
|
MDMD | 6.0E-5 | 1/℃ | ASTM E831 |
|
额定值Nominal Value | 单位Units | 测试方法Test Method |
折射率Refractive Index | 1.531 | ASTM D542 | |
透光率透射率 | |
|
|
3000 μm3000 μm | 92.0 | % | ASTM D1003 |
牌号简介 About |
---|
Zeonex-环烯烃聚合物(COP)为摄像机和激光打印机的光学部件提供了优良的光学性能。Zeonex的高纯度适用于各种医疗包装产品,而其低介电常数和损耗切线适用于电气绝缘应用。 Optical lens grade, high optical transparency and precision molding capability Features High transparency Low moisture absorption Good moldability Good coatability Uses Optical Lens Consumer electronics Camera lens Mirror |