东莞市天扬塑胶原料有限公司
商品描述
品类：PA9T
厂家：日本可乐丽
色号：NC
包装：25KG/包
产地：日本
货源：现货
仓库：现货
报告：有COA/COC
交货：送货到厂
其他：
备注：
用途：电气元件;电气/电子应用领域;
性能特点： 无卤; 防火阻燃等级HB; Halogen free,HB
填料：玻璃纤维 30
| 技术参数 Technical Data | |||
|---|---|---|---|
|
|
额定值Nominal Value | 单位Units | 测试方法Test Method |
| 密度Specific Gravity | 1.37 | g/cm3 | |
| 熔体质量流动速率熔体质量流动速率 | |
|
|
| 320℃，2.16kg320℃/2.16 kg | 45 | g/10min | ASTM D1238 |
| 收缩率Molding Shrinkage | |
|
|
| MD：1.0 mm流动:1.00 mm | 0.20 | % | |
| TD：1.00 mm横向流动:1.00 mm | 0.80 | % | |
| 吸水率吸水率 1 | |
|
|
| 平衡，40℃，95% RH平衡，40℃，95%RH 1 | 1.6 | % | |
|
|
额定值Nominal Value | 单位Units | 测试方法Test Method |
| 拉伸强度Tensile Strength | 160 | MPa | ASTM D638 |
| 拉伸应变拉伸应变 | |
|
|
| 断裂断裂 | 4.0 | % | ASTM D638 |
| 弯曲模量Flexural Modulus | 8500 | MPa | ASTM D790 |
| 弯曲强度Flexural Strength | 205 | MPa | ASTM D790 |
|
|
额定值Nominal Value | 单位Units | 测试方法Test Method |
| 悬臂梁缺口冲击强度Notched Izod Impact Strength | 110 | J/m | ASTM D256 |
|
|
额定值Nominal Value | 单位Units | 测试方法Test Method |
| 热变形温度热变形温度 | |
|
|
| 1.8 MPa，未退火1.8 MPa，未退火 | 290 | ℃ | ASTM D648 |
| 玻璃化转变温度Glass Transition Temperature | 125 | ℃ | |
| 熔融温度Melting Temperature | 306 | ℃ | |
|
|
额定值Nominal Value | 单位Units | 测试方法Test Method |
| 体积电阻率Volume Resistivity | 1.0E+16 | ohms·cm | ASTM D257 |
| 介电强度Electric Strength | 30 | kV/mm | ASTM D149 |
| 介电常数介电常数 | |
|
|
| 10.0 GHz10.0 GHz | 3.30 | ASTM D150 | |
| 耗散因数耗散因数 | |
|
|
| 10 GHz10.0 GHz | 9.0E-3 | ASTM D150 | |
| 相比漏电起痕指数Comparative Tracking Index (CTI) | PLC 0 | UL 746 | |
|
|
额定值Nominal Value | 单位Units | 测试方法Test Method |
| 阻燃等级Flame Rating | HB | UL 94 | |
|
|
额定值Nominal Value | 单位Units | 测试方法Test Method |
| 棒流动长度棒流动长度 2 | |
|
|
| 320℃，500.0 μm320℃，500.0 μm 2 | 5.30 | cm | |
| Weld ElongationWeld Elongation | 0.60 | % | ASTM D638 |
| Weld StrengthWeld Strength | 45.0 | MPa | ASTM D638 |
| 牌号简介 About |
|---|
| G1300H和G1350H适用于广泛的电气和电子元件，如UL94 HB可燃性等级，而G1302等级提供低摩擦。HB级不含含卤素阻燃剂。GW1458HF具有低翘曲和高流动性。*‘无卤’遵循Br小于900ppm，Cl小于900ppm，卤素总量（Br和Cl）小于1500ppm的标准。 The G1300H and G1350H are suitable for use in a wide range of electrical and electronics components as UL94 HB flammability rating, while the G1302 grade delivers low friction. HB grades do not contain halogen-containing flame-retardants. The GW1458HF offers low warpage and high flow-ability. *'Halogen free' follows the standards that Br is less than 900ppm, Cl is less than 900ppm, and total of halogen amount (Br and Cl) is less than 1500ppm. |
