东莞市天扬塑胶原料有限公司
产品描述 Product Description
用途：医疗/护理用品;薄膜;型材;连接器;密封件;垫圈;管件;
加工条件：注射成型Injection Molding
性能特点： 加热消毒; 耐磨; 辐射消毒; 耐水解; 环氧乙烷消毒; 冲击性能好; 韧性好; Good flexibility,High impact resistance,Hydrolysis stability,Radiation disinfection,Good wear resistance,Ethylene oxide disinfection,Heat sterilization
| 技术参数 Technical Data | |||
|---|---|---|---|
|
|
额定值Nominal Value | 单位Units | 测试方法Test Method |
| 密度Specific Gravity | 1.13 | g/cm3 | ASTM D792 |
| 密度Density | 1.13 | g/cm3 | ISO 1183 |
| 熔体质量流动速率熔体质量流动速率 | |
|
|
| 200℃，10.0kg200℃/10.0 kg | 13 | g/10min | ISO 1133 |
| 200℃，10.0kg200℃/10.0 kg | 13 | g/10min | ASTM D1238 |
| 收缩率Molding Shrinkage | |
ISO 2577 | |
| TD：2.54 mmTD，2.54 mm | 0.80 | % | ASTM D955 |
| MD：2.54 mmMD，2.54 mm | 0.80 | % | ASTM D955 |
| TD：2.54 mmAcross Flow : 2.54 mm | 0.80 | % | ISO 2577 |
| MD：2.54 mmFlow : 2.54 mm | 0.80 | % | ISO 2577 |
|
|
额定值Nominal Value | 单位Units | 测试方法Test Method |
| 邵氏硬度邵氏硬度 | |
|
|
| 邵氏 A邵氏 A | 90 | ASTM D2240 | |
| 邵氏 A邵氏 A | 90 | ISO 868 | |
| 弯曲模量弯曲模量 | |
|
|
| 23℃23℃ | 41.4 | MPa | ASTM D790 |
| 23℃23℃ | 41.4 | MPa | ISO 178 |
| 泰伯耐磨性Taber Abrasion Resistance | |
|
|
| 1000 周期，1000 g，H-18 转轮1000 Cycles, 1000 g, H-18 Wheel | 25.0 | mg | ISO 4649 |
| 1000 周期，1000 g，H-18 转轮1000 Cycles, 1000 g, H-18 Wheel | 25.0 | mg | ASTM D1044 |
|
|
额定值Nominal Value | 单位Units | 测试方法Test Method |
| 拉伸强度拉伸强度 | |
|
|
| 屈服屈服 | 40.7 | MPa | ISO 37 |
| 屈服屈服 | 40.7 | MPa | ASTM D412 |
| 300% 应变300%应变 | 14.5 | MPa | ISO 37 |
| 300% 应变300%应变 | 14.5 | MPa | ASTM D412 |
| 100% 应变100%应变 | 7.60 | MPa | ASTM D412 |
| 100% 应变100%应变 | 7.60 | MPa | ISO 37 |
| 拉伸应变拉伸应变 | |
|
|
| 断裂断裂 | 520 | % | ASTM D412 |
| 断裂断裂 | 520 | % | ISO 37 |
| 撕裂强度Tear Strength 2 2 | 136 | kN/m | ASTM D624 |
| 撕裂强度Tear Strength | 140 | kN/m | ISO 34-1 |
| 压缩形变Compression Set 3 3 | |
ASTM D395B | |
| 23℃，22 hr23°C, 22 hr | 13 | % | ASTM D395B |
| 70℃，22 hr70°C, 22 hr | 35 | % | ASTM D395B |
| 压缩形变Compression Set 3 3 | |
ISO 815 | |
| 23℃，22 hr23°C, 22 hr | 13 | % | ISO 815 |
| 70℃，22 hr70°C, 22 hr | 35 | % | ISO 815 |
|
|
额定值Nominal Value | 单位Units | 测试方法Test Method |
| 维卡软化温度Vicat Softening Temperature | 106 | ℃ | ASTM D1525 4 |
| 维卡软化温度Vicat Softening Temperature | 106 | ℃ | ISO 306/50 |
|
|
额定值Nominal Value | 单位Units | 测试方法Test Method |
| 黄度指数Yellowness Index | |
|
|
| ---- | 10 | YI | DIN 6167 |
| ---- | 10 | YI | ASTM E313 |
| 牌号简介 About |
|---|
| Texin? RxT90A树脂是一种芳香族聚醚基热塑性聚氨酯。可采用注塑、挤压或吹塑等加工方式。 Texin RxT90A resin is an aromatic polyether-based thermoplastic polyurethane. It can be processed by injection molding, extrusion or blow molding. |
