超高分子量聚乙烯拨瓶器特点
1、耐磨性：由于其独特的分子结构，耐磨性高于一般的金属塑料产品，是碳钢的6.6倍，不锈钢的5.5倍，黄铜的27.3倍，尼龙的6倍，聚四氟的5倍；
2、不粘性：表面张力大磨擦系数小，无极性，所以与常见物质不亲和，因此不易粘连结垢；
3、磨擦系数小：由于其内含蜡状物质，自润滑性很好，流阻小，节省能源；
4、耐化学腐蚀性：可耐除浓硫酸、浓硝酸等强氧化剂以外的几乎所有的酸、碱、盐介质；
5、耐冲击性好：即使在低温下，受到强烈的断裂；
6、电绝缘性：具有良好的电绝缘性，绝缘电阻；
7、其它性能：韧性好，抗疲劳，无渗出物，使用温度-70至90；

应用于啤酒机械厂，饮料厂，传动设备，包装机械厂，制药厂，纺织厂，造纸厂等

Characteristics of UHMWPE bottle puller

1. Wear resistance: due to its unique molecular structure, the wear resistance is higher than that of ordinary metal plastic products, which is 6.6 times of carbon steel, 5.5 times of stainless steel, 27.3 times of brass, 6 times of nylon and 5 times of polytetrafluoroethylene;

2. Non viscous: the surface tension is large, the friction coefficient is small, and the polarity is non-polar, so it is not compatible with common substances, so it is not easy to adhere and scale;

3. Small friction coefficient: because it contains waxy substances, it has good self lubrication, small flow resistance and saves energy;

4. Chemical corrosion resistance: it can resist almost all acid, alkali and salt media except strong oxidizing agents such as concentrated sulfuric acid and concentrated nitric acid;

5. Good impact resistance: strong fracture even at low temperature;

6. Electrical insulation: good electrical insulation and insulation resistance;

7. Other properties: good toughness, anti fatigue, no exudate, service temperature - 70 to 90;

It is used in Beer machinery factory, beverage factory, transmission equipment, packaging machinery factory, pharmaceutical factory, textile factory, paper mill, etc