Styron EMERGE系列PC/ABS型号以及详细说明；

PC/ABS，聚碳酸酯和丙烯腈-丁二烯-苯乙烯共聚物和混合物，是由PC和ABS合金而成的热可塑性塑胶，结合了两种材料的优异特性，ABS材料的成型性和PC的机械性、冲击强度和耐温、抗紫外线（UV）等性质，可广泛使用在汽车内部零件、事务机器、通信器材、家电用品及照明设备上。典型应用范围:手机外壳、计算机和商业机器壳体、电器设备、草坪园艺机器、汽车零件仪表板、内部装修以及车轮盖）。

注塑模工艺条件:干燥处理：加工前的干燥处理是必须的。湿度应小于0.04%，建议干燥条件为90~110C，2~4小时。熔化温度： 230~300C。模具温度：50~100C。注射压力：取决于塑件。注射速度：尽可能地高。

化学和物理特性: PC/ABS具有PC和ABS两者的综合特性。例如ABS的易加工特性和PC的优良机械特性和热稳定性。二者的比率将影响PC/ABS材料的热稳定性。PC/ABS这种混合材料还显示了优异的流动特性。收缩率在0.5%左右。

我公司长期经营Styron EMERGE系列PC/ABS，货源稳定，质量保证，原厂原包，假一罚十。可提供SGS、ROHS、UL黄卡、MSDS、FDA、COC、PDF物性表等各项数据，欢迎来电洽谈！

同时供应EMERGE 7100 7350 7500 7502 7530 7550 7570 7570EP 7580 7590 7600 7770 7800 7880ECO 9100CR等规格型号。

PC/ABS EMERGE 7100同系列通用型号介绍

EMERGE PC/ABS 7100 advanced resin exhibits a balance of properties between impact strength.

EMERGE PC/ABS 7350 advanced resin is a high flow and high toughness PC/ABS alloy.

EMERGE PC/ABS 7502 is a non-halogen ignition resistant 20% glass filled PC/ABS resin.

EMERGE PC/ABS 7530 advanced resin is a high flow, ignition-resistant PC/ABS.

EMERGE PC/ABS 7570 Advanced Resin is a high flow, ignition-resistant PC/ABS.

EMERGE PC/ABS 7580 is an ignition resistant PC/ABS blend that contains no chlorine or bromine additives.

EMERGE PC/ABS 7590 advanced resin is an ignition-resistant PC/ABS blend that contains no chlorine or bromine additives.

EMERGE PC/ABS 7600 is an ignition-resistant PC/ABS blend that contains no chlorine or bromine additives.

EMERGE PC/ABS 7800 Advanced Resin is an ignition-resistance PC/ABS blend that contains no chlorine or bromine additives.