东莞市常平浩云塑胶经营部
TOTAL 2451 PS (HIPS)
TOTAL 3341 PS (HIPS)
TOTAL 3351 PS (HIPS)
TOTAL 3441 PS (HIPS)
TOTAL 3450 PS (HIPS)
TOTAL 3630 PS (HIPS)
TOTAL 4440 (AS) PS (HIPS)
TOTAL 4440 (EU) PS (HIPS)
TOTAL 6540 T PS (HIPS)
TOTAL 6541 PS (HIPS)
TOTAL 7240 PS (HIPS)
TOTAL 740 PS (HIPS)
TOTAL 801 PS (HIPS)
TOTAL 807 PS (HIPS)
TOTAL 815 PS (HIPS)
TOTAL 818 PS (HIPS)
TOTAL 818E PS (HIPS)
TOTAL 819E PS (HIPS)
TOTAL 820 PS (HIPS)
TOTAL 822 PS (HIPS)
TOTAL 825 PS (HIPS)
TOTAL 825E PS (HIPS)
TOTAL 825EX PS (HIPS)
TOTAL 8260 PS (HIPS)
TOTAL 827 PS (HIPS)
TOTAL 830 PS (HIPS)
TOTAL 8350 (AS) PS (HIPS)
TOTAL 8350 (EU)PS (HIPS)
TOTAL 844E PS (HIPS)
TOTAL 845E PS (HIPS)
TOTAL 850S PS (HIPS)
TOTAL 853 PS (HIPS)
TOTAL 855HV PS (HIPS)
TOTAL 855S PS (HIPS)
TOTAL 856 PS (HIPS)
TOTAL 856S PS (HIPS)
TOTAL 863 PS (HIPS)
TOTAL 935E PS (HIPS)
TOTAL 940E PS (HIPS)
TOTAL 945 PS (HIPS)
TOTAL 945E PS (HIPS)
TOTAL 960E PS (HIPS)
TOTAL 975E PS (HIPS)
TOTAL FT 875 (AS) PS (HIPS)
TOTAL FT 875 (EU) PS (HIPS)
TOTAL FT 878 PS (HIPS)
TOTAL FT876 PS (HIPS)
TOTAL Polystyrene Impact 6540
High Impact Polystyrene
TOTAL Refining Chemicals
产品说明：
POLYSTYRENE IMPACT 6541 is an easy flowing, high impact polystyrene with a good balance of mechanical and thermal properties. This resin combines physical properties such as the flow necessary for large or complex mouldings, the impact resistance for good mechanical properties in thin wall sections and good thermal properties for articles subjected to elevated temperatures in use. The combination of properties also offers high productivity.
POLYSTYRENE IMPACT 6540 satifies the requirements of a wide range of molding applications. Toys, television housings, food packaging, refrigerator, computer keyboards, office equipment, household items...
POLYSTYRENE IMPACT 6540 satifies the requirements of a wide range of molding applications. Toys, television housings, food packaging, refrigerator, computer keyboards, office equipment, household items...
物性信息：
| 基本信息 | |
|---|---|
| 黄卡编号 | |
| 特性 |
|
| 用途 |
|
| 机构评级 |
|
| 形式 |
|
| 物理性能 | 额定值 | 单位制 | 测试方法 |
|---|---|---|---|
| 密度 | 1.04 | g/cm3 | ISO 1183 |
| 表观密度 | 0.60 | g/cm3 | |
| 熔流率（熔体流动速率）(200°C/5.0 kg) | 12 | g/10 min | ISO 1133 |
| 收缩率 | 0.40 到 0.70 | % | |
| 吸水率(23°C, 24 hr) | 0.10 | % | ISO 62 |
| 硬度 | 额定值 | 单位制 | 测试方法 |
|---|---|---|---|
| 洛氏硬度(R 计秤) | 78 | ISO 2039-2 |
| 机械性能 | 额定值 | 单位制 | 测试方法 |
|---|---|---|---|
| 拉伸应力 | ISO 527-2 | ||
| 屈服, 23°C, 注塑 | 25.0 | MPa | ISO 527-2 |
| 断裂, 23°C, 注塑 | 20.0 | MPa | ISO 527-2 |
| 拉伸应变(断裂, 23°C, 注塑) | 45 | % | ISO 527-2 |
| 弯曲模量(23°C, 注塑) | 2100 | MPa | ISO 178 |
| 冲击性能 | 额定值 | 单位制 | 测试方法 |
|---|---|---|---|
| 悬壁梁缺口冲击强度(23°C, 注塑) | 9.5 | kJ/m2 | ISO 180/1A |
| 热性能 | 额定值 | 单位制 | 测试方法 |
|---|---|---|---|
| 热变形温度 | ISO 75-2/A | ||
| 1.8 MPa, 未退火 | 68.0 | °C | ISO 75-2/A |
| 1.8 MPa, 退火 | 80.0 | °C | ISO 75-2/A |
| 维卡软化温度 | |||
| -- | 92.0 | °C | ISO 306/A50 |
| -- | 83.0 | °C | ISO 306/B50 |
| 线形热膨胀系数 - 流动 | 9.1E-5 | cm/cm/°C | ISO 11359-2 |
| 电气性能 | 额定值 | 单位制 | 测试方法 |
|---|---|---|---|
| 表面电阻率 | 1.0E+13 | ohms | IEC 60093 |
| 介电强度 | 150 | kV/mm | IEC 60243-1 |
