3ΜCN 3190 Cu/Ni fabric tape consists ofAnti-corrosion treated copper-nickel coatedconductive polyester fabric and unique electricallyconductive pressure-

sensitive acrylic adhesive.b l; Anti-corrosion treated Cu/Ni conductivefabricb l;

Conductive acrylic adhesiveb l; Supplied on a removable liner for easyhandling

and die-cuttingLike all shielding tapes, CN 3190 tapesare available in

standard and custom widths andlengths. Standard length is 25M.b l; Widths

from 6mm to 1050mmb l; Longer lengths up to several times normallength,

dependent upon width. Check withCustomer Service.Applications CN 3190

Cu/Ni fabric tape is typically used inmany applications typically served by metal foilshielding tapes such as grounding and EMIshielding in equipment, components, shieldedrooms, etc.The unique metalized fabric backing offers theadditional

benefits of excellent flexibility andconformability, very light weight, and exceptionalstrength. The fabric backing also minimizes thepossibility of finger lacerations.Shielding EffectivenessMany factors determine the true shieldingeffe

ctiveness of a shielding tape, including typeand thickness of foil, adhesive type,

intimacy ofcontact, smoothness of application surface,strength and frequency of

the EMI signal, etc.However, using standard tests and fixtures, it ispossible to

determine a value for the attenuation.For CN 3190 Cu/Ni fabric tape, typical

shielding effectiveness is in the range of 65dB to70dBCN 3190 Cu/Ni Fabric Tape –

Typical PropertiesProperties Typical ValueType of Backing Copper/Nickel coated conductive fabricType of Adhesive Conductive acrylic adhesiveTotal thickness

(backing plus adhesive) 0.11mmBreaking strength 1 18 kgf/25mm (40 lb/in)Adhesion strength 1 900gf/25mm (31 oz/in)Electrical resistance through adhesive 2 0.05Ω* Foot note 1. Test method ASTM D 10002. MIL-STD-202 Method 307 maintained at 5 psi (3,4N/cm2) measured over in2 surfacearea. Conductive particles in the adhesive

provide the electrical path between theapplication substrate and the foil backing.