上海汇堡材料科技有限公司
DuPont Performance Polymers Zytel? FN714 NC010A Nylon 66 物性表
| 物理性能 | 额定值 (公制) | 额定值 (英制) | 测试方法 |
|---|---|---|---|
| 密度 | 1.02 g/cc | 0.0368 lb/in3 | DAM; ISO 1183 |
| 机械性能 | 额定值 (公制) | 额定值 (英制) | 测试方法 |
|---|---|---|---|
| 抗张强度(断裂) | 29.0 MPa
@Temperature 23.0 °C
|
4210 psi
@Temperature 73.4 °F
|
DAM; ISO 527 |
| 抗张强度(屈服) | 29.0 MPa
@Temperature 23.0 °C
|
4210 psi
@Temperature 73.4 °F
|
DAM; ISO 527 |
| 伸长率 (断裂) | = 50 %
@Temperature 23.0 °C
|
= 50 %
@Temperature 73.4 °F
|
DAM; nominal; ISO 527 |
| 190 %
@Temperature 23.0 °C
|
190 %
@Temperature 73.4 °F
|
DAM; nominal; ISO 527 | |
| 220 %
@Temperature 23.0 °C
|
220 %
@Temperature 73.4 °F
|
DAM; ISO 527 | |
| 拉伸模量 | 0.475 GPa
@Temperature 23.0 °C
|
68.9 ksi
@Temperature 73.4 °F
|
DAM; ISO 527 |
| 弯曲模量 | 0.575 GPa
@Temperature 23.0 °C
|
83.4 ksi
@Temperature 73.4 °F
|
DAM; ISO 178 |
| 悬壁梁缺口冲击强度 | NB
@Temperature 23.0 °C
|
NB
@Temperature 73.4 °F
|
DAM; ISO 180/1A |
| 简支梁缺口冲击强度 | 9.50 J/cm2
@Temperature 23.0 °C
|
45.2 ft-lb/in2
@Temperature 73.4 °F
|
DAM; ISO 179/1eA |
| 热性能 | 额定值 (公制) | 额定值 (英制) | 测试方法 |
|---|---|---|---|
| 熔融温度 | 263 °C | 505 °F | 10°C/min; DAM; ISO 11357-1/-3 |
| 载荷下热变形温度(0.46 MPa) | 55.0 °C | 131 °F | DAM; ISO 75-1/-2 |
| 载荷下热变形温度(1.8 MPa) | 45.0 °C | 113 °F | DAM; ISO 75-1/-2 |
| 加工性能 | 额定值 (公制) | 额定值 (英制) | 测试方法 |
|---|---|---|---|
| 加工（熔体）温度 | 285 °C | 545 °F | DAM; Optimum; Extrusion |
| 285 °C | 545 °F | DAM; Optimum; Injection Molding | |
| 275 - 295 °C | 527 - 563 °F | DAM; Extrusion | |
| 275 - 295 °C | 527 - 563 °F | DAM; Injection Molding | |
| 模具温度 | 60.0 °C | 140 °F | DAM; optimum; Injection Molding |
| 40.0 - 80.0 °C | 104 - 176 °F | DAM; Injection Molding | |
| 干燥温度 | 80.0 °C | 176 °F | DAM; Extrusion |
| 80.0 °C | 176 °F | DAM; Injection Molding | |
| 干燥时间 | 2.00 - 4.00 hour | 2.00 - 4.00 hour | DAM; Injection Molding |
| 4.00 - 6.00 hour | 4.00 - 6.00 hour | DAM; Extrusion | |
| 水分含量 | = 0.050 % | = 0.050 % | DAM; Extrusion |
| = 0.20 % | = 0.20 % | DAM; Injection Molding |
| 材料描述 | 测试方法 | |
|---|---|---|
| 外观 | Natural Color | DAM |
| 特性 | Chemical Resistance, Good | DAM |
| Chemical Resistance, Good | DAM | |
| Flexibility, Good | DAM | |
| Flexibility, Good | DAM | |
| Heat Aging Resistance, Good | DAM | |
| Heat Aging Resistance, Good | DAM | |
| Impact Modified | DAM | |
| Impact Modified | DAM | |
| 形式 | Pellets | DAM |
| Generic | Nylon 66 | DAM |
| Material Status | Current | DAM |
| 部件标识代码 | PA66-F | ISO 11469; DAM |
| 加工方法 | Injection Molding | DAM |
| 产品分类 | Toughened Resins | DAM |
| Unreinforced Resins | DAM | |
| Region Available - Global | Yes | DAM |
| 树脂识别 | PA66-F | ISO 1043; DAM |
| 符合RoHS指令 | Contact Manufacturer | DAM |
