东莞市常平浩云塑胶经营部
Petrothene GA652762 HDPE
Petrothene GA655662 HDPE
Petrothene GA672762 HDPE
Petrothene KR52828E HDPE
Petrothene KR92717 HDPE
Petrothene KR92828 HDPE
Petrothene LB010000 HDPE
Petrothene LB500300 HDPE
Petrothene LB500301 HDPE
Petrothene LB500342 HDPE
Petrothene LB560200 HDPE
Petrothene LB560201 HDPE
Petrothene LB560210 HDPE
Petrothene LB560400 HDPE
Petrothene LB560401 HDPE
Petrothene LB560410 HDPE
Petrothene LB560454 HDPE
Petrothene LB570300 HDPE
Petrothene LB832001 HDPE
Petrothene LM600500 HDPE
Petrothene LM600700 HDPE
Petrothene LM600731 HDPE
Petrothene LM600731X01 HDPE
Petrothene LP500200 HDPE
Petrothene LP500210 HDPE
Petrothene LP5100 HDPE
Petrothene LP510300 HDPE
Petrothene LP540200 HDPE
Petrothene LR590005 HDPE
Petrothene LR686001 HDPE
Petrothene LR7320 HDPE
Petrothene LR732001 HDPE
Petrothene LR732011 HDPE
Petrothene LR732013 HDPE
Petrothene LR732031 HDPE
Petrothene LR732079 HDPE
Petrothene LR7340 HDPE
Petrothene LR734001 HDPE
Petrothene LR734011 HDPE
Petrothene LR734045 HDPE
Petrothene LR763001 HDPE
Petrothene LR763011X01 HDPE
Petrothene LR765701 HDPE
Petrothene LR776031 HDPE
Petrothene LR7810 HDPE
Petrothene LR781011 HDPE
Petrothene LRTR436 HDPE
Petrothene LT463011X01 HDPE
Petrothene LT493811X01 HDPE
Petrothene LT543511X01 HDPE
Petrothene LT570401 HDPE
Piolen PE T30A103 HDPE
Petrothene LP510300
高密度聚乙烯共聚物
LyondellBasell Industries
产品说明：
PETROTHENE LP510300 is a copolymer resin designed for blown film applications. This resin offers high stiffness, excellent appearance and bubble stability and good drawdown. LP510300 is recommended for merchandise bags, and multi-wall sack liners and barrier sheeting. It is also useful as a blend component for improved stiffness and machineability.
Petrothene LP510300 物性表
| 基本信息 | |
|---|---|
| 特性 |
|
| 用途 |
|
| 机构评级 |
|
| 形式 |
|
| 加工方法 |
|
| 物理性能 | 额定值 | 单位制 | 测试方法 |
|---|---|---|---|
| 密度 | 0.949 | g/cm3 | ASTM D1505 |
| 熔流率（熔体流动速率）(190°C/2.16 kg) | 0.33 | g/10 min | ASTM D1238 |
| 薄膜 | 额定值 | 单位制 | 测试方法 |
|---|---|---|---|
| 薄膜厚度 - 经测试 | 51 | μm | |
| 割线模量 | ASTM E111 | ||
| 1% 正割, MD : 51 μm | 758 | MPa | ASTM E111 |
| 1% 正割, TD : 51 μm | 924 | MPa | ASTM E111 |
| 抗张强度 | ASTM D882 | ||
| MD : 屈服, 51 μm | 24.8 | MPa | ASTM D882 |
| TD : 屈服, 51 μm | 28.3 | MPa | ASTM D882 |
| MD : 断裂, 51 μm | 43.4 | MPa | ASTM D882 |
| TD : 断裂, 51 μm | 31.0 | MPa | ASTM D882 |
| 伸长率 | ASTM D882 | ||
| MD : 断裂, 51 μm | 500 | % | ASTM D882 |
| TD : 断裂, 51 μm | 670 | % | ASTM D882 |
| 落锤冲击(51 μm, 吹塑薄膜) | 70 | g | ASTM D1709 |
| 埃尔曼多夫抗撕强度 | ASTM D1922 | ||
| MD : 51 μm, 吹塑薄膜 | 31 | g | ASTM D1922 |
| TD : 51 μm, 吹塑薄膜 | 1200 | g | ASTM D1922 |
| 氧气传输速率(51 μm, 吹塑薄膜) | 2400 | cm3/m2/24 hr | ASTM D3985 |
| 水蒸气透过性1 | 3.3 | g/m2/24 hr | ASTM F372 |
| 热性能 | 额定值 | 单位制 | 测试方法 |
|---|---|---|---|
| 维卡软化温度 | 126 | °C | ASTM D1525 |
| 备注 | |
|---|---|
| 1 . | 2 mil, Blown Film |
