东莞市常平浩云塑胶经营部
INEOS CFT K46-06-185 HDPE
INEOS CFT LRB711 HDPE
INEOS CFT RSB714N0060 HDPE
INEOS A4040 HDPE
INEOS A60-70-162 HDPE
INEOS B4020N1331 HDPE
INEOS B4020N1332 HDPE
INEOS B4020N1333 HDPE
INEOS B50-35H-176 HDPE
INEOS B53-35H-011 HDPE
INEOS B53-35H-100 HDPE
INEOS B54-25H-127 HDPE
INEOS CP53-30 HDPE
INEOS G36-10-150 MDPE
INEOS G50-100 HDPE
INEOS G60-25-144 HDPE
INEOS H48-500-199 HDPE
INEOS HB111R HDPE
INEOS HP50-25-153 HDPE
INEOS HP53-25-155 HDPE
INEOS HP54-60 FLK HDPE
INEOS J50-1000-178 HDPE
INEOS J50-1000-181 HDPE
INEOS J50-1000-187 HDPE
INEOS J50-2000-119 HDPE
INEOS J50-200-178 HDPE
INEOS J60-1700-173 HDPE
INEOS J60-800-178 HDPE
INEOS K38-20-123 MDPE
INEOS K38-20-138 MDPE
INEOS K38-20-160 MDPE
INEOS K38-20-188 MDPE
INEOS K44-06-122 HDPE
INEOS K44-08-122 HDPE
INEOS K44-11-128 HDPE
INEOS K44-15-122 HDPE
INEOS K44-15-186 HDPE
INEOS K46-06-185 HDPE
INEOS K50-10-136 HDPE
INEOS K54-05 HDPE
INEOS T50-1000 HDPE
INEOS T50-200 HDPE
INEOS T50-2000 HDPE
INEOS T50-400 HDPE
INEOS T50-4400 HDPE
INEOS T50-500 HDPE
INEOS T50-500-171 HDPE
INEOS T50-500-196 HDPE
INEOS T50-800 HDPE
INEOS T60-500 HDPE
INEOS T60-800 HDPE
INEOS TC46-25 HDPE
INEOS HDPE K54-05
高密度聚乙烯共聚物
INEOS Olefins Polymers USA
产品说明：
K54-05 is a high molecular weight, high density polyethylene copolymer intended for blow molding large parts such as drums. It combines excellent processability and a good balance of stiffness, environmental stress crack resistance (ESCR) and impact properties. This resin meets the Food and Drug Administration requirements of 21CFR 177.1520 for contact with food.
INEOS HDPE K54-05 物性表
| 基本信息 | |
|---|---|
| 特性 |
|
| 用途 |
|
| 机构评级 |
|
| RoHS 合规性 |
|
| 形式 |
|
| 加工方法 |
|
| 物理性能 | 额定值 | 单位制 | 测试方法 |
|---|---|---|---|
| 密度 | 0.954 | g/cm3 | ASTM D4883 |
| 熔流率（熔体流动速率）(190°C/21.6 kg) | 5.0 | g/10 min | ASTM D1238 |
| 抗环境应力开裂 | |||
| 10% Igepal, F50 | 140 | hr | ASTM D1693B |
| 100% Igepal, F50 | 1800 | hr | ASTM D1693A |
| 100% Igepal, F50 | 1000 | hr | ASTM D1693B |
| 硬度 | 额定值 | 单位制 | 测试方法 |
|---|---|---|---|
| 肖氏硬度(邵氏 D) | 64 | ASTM D2240 |
| 机械性能 | 额定值 | 单位制 | 测试方法 |
|---|---|---|---|
| 抗张强度1 | ASTM D638 | ||
| 屈服 | 28.6 | MPa | ASTM D638 |
| 断裂 | 41.4 | MPa | ASTM D638 |
| 伸长率2 | ASTM D638 | ||
| 屈服 | 9.0 | % | ASTM D638 |
| 断裂 | 900 | % | ASTM D638 |
| 弯曲模量 | ASTM D790A | ||
| 2% 正割 | 1050 | MPa | ASTM D790A |
| 正切 | 1410 | MPa | ASTM D790A |
| 冲击性能 | 额定值 | 单位制 | 测试方法 |
|---|---|---|---|
| 悬壁梁缺口冲击强度 | 700 | J/m | ASTM D256 |
| 悬壁梁缺口冲击强度 | 69.3 | kJ/m2 | ASTM D256 |
| 热性能 | 额定值 | 单位制 | 测试方法 |
|---|---|---|---|
| 载荷下热变形温度 | ASTM D648 | ||
| 0.45 MPa, 未退火 | 70.0 | °C | ASTM D648 |
| 1.8 MPa, 未退火 | 47.2 | °C | ASTM D648 |
| 脆化温度 | -75.0 | °C | ASTM D746 |
| 维卡软化温度 | 128 | °C | ASTM D1525 |
| 备注 | |
|---|---|
| 1 . | 51 mm/min |
| 2 . | 51 mm/min |
