东莞市常平浩云塑胶经营部
INEOS CFT K46-06-185 HDPE
INEOS CFT LRB711 HDPE
INEOS CFT RSB714N0060 HDPE
INEOS A4040 HDPE
INEOS A60-70-162 HDPE
INEOS B4020N1331 HDPE
INEOS B4020N1332 HDPE
INEOS B4020N1333 HDPE
INEOS B50-35H-176 HDPE
INEOS B53-35H-011 HDPE
INEOS B53-35H-100 HDPE
INEOS B54-25H-127 HDPE
INEOS CP53-30 HDPE
INEOS G36-10-150 MDPE
INEOS G50-100 HDPE
INEOS G60-25-144 HDPE
INEOS H48-500-199 HDPE
INEOS HB111R HDPE
INEOS HP50-25-153 HDPE
INEOS HP53-25-155 HDPE
INEOS HP54-60 FLK HDPE
INEOS J50-1000-178 HDPE
INEOS J50-1000-181 HDPE
INEOS J50-1000-187 HDPE
INEOS J50-2000-119 HDPE
INEOS J50-200-178 HDPE
INEOS J60-1700-173 HDPE
INEOS J60-800-178 HDPE
INEOS K38-20-123 MDPE
INEOS K38-20-138 MDPE
INEOS K38-20-160 MDPE
INEOS K38-20-188 MDPE
INEOS K44-06-122 HDPE
INEOS K44-08-122 HDPE
INEOS K44-11-128 HDPE
INEOS K44-15-122 HDPE
INEOS K44-15-186 HDPE
INEOS K46-06-185 HDPE
INEOS K50-10-136 HDPE
INEOS K54-05 HDPE
INEOS T50-1000 HDPE
INEOS T50-200 HDPE
INEOS T50-2000 HDPE
INEOS T50-400 HDPE
INEOS T50-4400 HDPE
INEOS T50-500 HDPE
INEOS T50-500-171 HDPE
INEOS T50-500-196 HDPE
INEOS T50-800 HDPE
INEOS T60-500 HDPE
INEOS T60-800 HDPE
INEOS TC46-25 HDPE
INEOS HDPE K44-15-186
高密度聚乙烯共聚物
INEOS Olefins Polymers USA
产品说明：
K44-15-186 is a blue high-density polyethylene copolymer designed specifically for extrusion of pipe by blending K44-15-122 natural resin with G38-70C BLU II concentrate or an approved equivalent. It has NSF Standard 14 certification and complies with ANSI/NSF Standard 61 health effects requirements and is recognized by the Plastic Pipe Institute as having a PE 3608 (formerly PE 3408) rating.
INEOS HDPE K44-15-186 物性表
| 基本信息 | |
|---|---|
| 特性 |
|
| 用途 |
|
| 机构评级 |
|
| RoHS 合规性 |
|
| 外观 |
|
| 形式 |
|
| 加工方法 |
|
| 物理性能 | 额定值 | 单位制 | 测试方法 |
|---|---|---|---|
| 密度 | 0.944 | g/cm3 | ASTM D4883 |
| 熔流率（熔体流动速率）(190°C/21.6 kg) | 13 | g/10 min | ASTM D1238 |
| 抗环境应力开裂 | |||
| -- | 2000 | hr | ASTM D1693B |
| -- | 5000 | hr | ASTM D1693C |
| 硬度 | 额定值 | 单位制 | 测试方法 |
|---|---|---|---|
| 肖氏硬度(邵氏 D) | 68 | ASTM D2240 |
| 机械性能 | 额定值 | 单位制 | 测试方法 |
|---|---|---|---|
| 抗张强度1 | ASTM D638 | ||
| 屈服 | 22.8 | MPa | ASTM D638 |
| 断裂 | 31.0 | MPa | ASTM D638 |
| 伸长率2(断裂) | 800 | % | ASTM D638 |
| 弯曲模量 - 2% 正割3 | 827 | MPa | ASTM D790 |
| 流体静力学设计基础(23°C) | 11.0 | MPa | ASTM D2837 |
| 补充信息 | 额定值 | 单位制 | 测试方法 |
|---|---|---|---|
| PENT - Notch Tensile | 30 | hr | ASTM F1473 |
| 单元分类 | 345464E | ASTM D3350 |
| 冲击性能 | 额定值 | 单位制 | 测试方法 |
|---|---|---|---|
| 悬壁梁缺口冲击强度 | 320 | J/m | ASTM D256 |
| 热性能 | 额定值 | 单位制 | 测试方法 |
|---|---|---|---|
| 脆化温度 | -118 | °C | ASTM D746 |
| 维卡软化温度 | 126 | °C | ASTM D1525 |
| 备注 | |
|---|---|
| 1 . | 51 mm/min |
| 2 . | 51 mm/min |
| 3 . | 方法 I (三点负荷) |
