巴斯夫Elastollan系列TPU简介

TPU(Thermoplastic polyurethanes)名称为热塑性聚氨酯弹性体橡胶。主要分为有聚酯型和聚醚型之分，它硬度范围宽（60HA-85HD）、耐磨、耐油，透明，弹性好，在日用品、体育用品、玩具、装饰材料等领域得到广泛应用，无卤阻燃TPU还可以代替软质PVC以满足越来越多领域的环保要求。热塑性聚氨酯弹性体(Thermoplastic polyurethane) ：所谓弹性体是指玻璃化温度低于室温度,断裂伸长率50%,外力撤除后复原性比较好的高分子材料。聚氨酯弹性体是弹性体中比较特殊的一大类，聚氨酯弹性体的硬度范围很宽，性能范围很宽，所以聚氨酯弹性体是介于橡胶和塑料的一类高分子材料。

TPU的主要特性有：

硬度范围广：通过改变TPU各反应组分的配比，可以得到不同硬度的产品，而且随着硬度的增加，其产品仍保持良好的弹性和耐磨性。

机械强度高：TPU制品的承载能力、抗冲击性及减震性能突出。

耐寒性突出：TPU的玻璃态转变温度比较低，在零下35度仍保持良好的弹性、柔顺性和其他物理性能。

加工性能好：TPU可采用常见的热塑性材料的加工方法进行加工，如注塑、挤出、压延等等。同时，TPU与某些高分子材料共同加工能够得到性能互补的聚合物合金。

耐油、耐水、耐霉菌。再生利用性好。

TPU作为弹性体是介于橡胶和塑料之间的一种材料，这从它的刚性看出来，TPU的刚性可由弹性模量来度量。橡胶的弹性模量通常在1~10Mpa，TPU在10~1000Mpa，塑料（尼龙，ABS，PC，POM）在1000~10000Mpa。TPU 的硬度范围相当宽，从Shore A 60~Shore D 80并且在整个硬度范围内具有高弹性；TPU在很宽的温度范围内-40~120℃，具有柔性，而不需要增塑剂； TPU对油类（矿物油，动植物油脂和润滑油）和许多溶剂有良好的抵抗能力；TPU 还有良好的耐天候性，极优的耐高能射线性能。众所周知的耐磨性，抗撕裂性，屈扰强度都是优良的；拉伸强度高，伸长率大，长期压缩永久变形率低等都是TPU的显著优点。

这里介绍的TPU性能包括三个方面：力学性能，物理性能和环境性能。

可加热塑化，化学结构上没有或很少交联，其分子基本是线性的，然而却存在一定的物理交联。这类聚氨酯称为TPU 。

巴斯夫Elastollan系列介绍

Elastollan 1085A Thermoplastic Polyether-Polyurethane-Elastomer with excellent mechanical properties

Elastollan 1154D53 is a polyether-based thermoplastic polyurethane (TPU). It exhibits excellent abrasion resistance, toughness, transparency, low temperature properties, hydrolytic stability, and fungus resistance.

Elastollan 1164D50 is a polyether-based thermoplastic polyurethane (TPU). It exhibits excellent abrasion resistance, toughness, transparency, low temperature properties, hydrolytic stability, and fungus resistance.

Elastollan 1174D50 is a polyether-based thermoplastic polyurethane (TPU). It exhibits excellent abrasion resistance, toughness, transparency, low temperature properties, hydrolytic stability, and fungus resistance

Elastollan 1175A10W is a polyether-based thermoplastic polyurethane (TPU) containing a plasticizer.

Elastollan 1180A10 is a polyether-based thermoplastic polyurethane (TPU). It is specifically formulated for extruded profile, sheet and film applications.

Elastollan 1185A10FHF is a polyether-based thermoplastic polyurethane (TPU) containing a non-halogenated fire retardant. It is specifically formulated for wire and cable jacketing, extruded profile, sheet and film applications.

Elastollan 1185A10XU is a polyether-based thermoplastic polyurethane (TPU) with UV stabilizer and a MFI value of 41-60 (at 190°C/21.6 kg).

Elastollan 1185A50V is a polyether-based thermoplastic polyurethane (TPU). It exhibits excellent abrasion resistance, toughness, transparency, low temperature properties, hydrolytic stability, and fungus resistance.

Elastollan 1190A10 is a polyether-based thermoplastic polyurethane (TPU). It is specifically formulated for extruded profile, sheet and film applications.

Elastollan 1195A10 is a polyether-based thermoplastic polyurethane (TPU). It exhibits excellent abrasion resistance, toughness, transparency, low temperature properties, hydrolytic stability and fungus resistance.

Elastollan 1195A55 is a polyether-based thermoplastic polyurethane (TPU). It exhibits excellent abrasion resistance, toughness, transparency, low temperature properties, hydrolytic stability, and fungus resistance.

Elastollan 688A10N is part of a new series of film grade polyester-based thermoplastic polyurethanes (TPU).

Elastollan 695A15N is part of a new series of film grade polyester-based thermoplastic polyurethanes (TPU).

Elastollan C60A10W is a polyester-based thermoplastic polyurethane (TPU) containing a plasticizer.

Elastollan C59D53 is a polyester-based thermoplastic polyurethane (TPU). It exhibits excellent abrasion resistance and toughness, good hydrolytic stability, good heat, oil, fuel, and solvent resistance. As with all TPU products,

Elastollan S90A55N is a polyester-based thermoplastic polyurethane (TPU). It exhibits excellent abrasion resistance and toughness, good heat, oil, fuel, and solvent resistance.

Elastollan S95A55N is a polyester-based thermoplastic polyurethane (TPU). It exhibits excellent abrasion resistance and toughness, good heat, oil, fuel, and solvent resistance.

Elastollan S98A53N is a polyester-based thermoplastic polyurethane (TPU). It exhibits excellent abrasion resistance and toughness, good heat, oil, fuel, and solvent resistance.

Elastollan SP806-10 is a polyether-based thermoplastic polyurethane (TPU). It is specifically formulated for extruded profile, film and sheet applications, and has exceptional adhesion characteristics.

我公司长期经营巴斯夫Elastollan系列TPU， 可提供SGS、ROHS、REACH、UL黄卡、MSDS、FDA、COA、PDF物性表等各项数据，多年诚信为本，货源稳定、现货库存、质量保证。欢迎来电洽谈！

以上是供应德国巴斯夫Elastollan系列TPU的详细信息，，如果您对供应 德国巴斯夫Elastollan系列TPU的信息有什么疑问，请与该公司进行进一步联系，获取供应德国巴斯夫Elastollan系列TPU的更多信息。

公司承诺；

1、可提供原料出厂证明和物性表，UL黄卡，ROHS报告，SGS等资料、品质保证；

2、最优质的售后服务与技术支持；

3、提供塑胶原料国内一般贸易13%税。

4、凡在我司购买材料均可以提供能力范围内技术支持，提供相关环保等资料。

5、本公司原料25公斤起订，批量可折扣，款到发货或货到付款，珠三角一天内到达，国内各地3-4天到货.(物流运送所有货物都有套外保护袋，验货时可拆开)。

6、欢迎来电查询物料性质，免费提供物性表，提供加工相关数据与物料应用范围。

7、本公司所售原料均为原厂原包装正牌料，杜绝一切副牌料，不开封，无破损! 签订购销合同和质量保证，长期合作!

8、尊敬的新老顾客朋友们！价格有时未能及时更新，可能与实际价格有出入，以口头报价为准，谢谢！欢迎来电洽谈！