东莞市顺盈塑胶原料有限公司
产品描述?Product Description
厂家：美国RTP??RTP Company
类别：PP??PP not specified
加工条件：注射成型??Injection Molding
性能特点：可回收;???Renewable resources
| 技术参数?Technical Data | |||
|---|---|---|---|
|
|
额定值??Nominal Value | 单位??Units | 测试方法??Test Method |
| 密度??Specific Gravity | 1.00 | g/cm3 | ASTM D792 |
| 收缩率??收缩率 | |||
| MD：3.2 mm??MD，3.20 mm | 0.30 到 0.60 | % | ASTM D955 |
|
|
额定值??Nominal Value | 单位??Units | 测试方法??Test Method |
| 拉伸模量??Tensile Modulus | 1720 | MPa | ASTM D638 |
| 拉伸强度??Tensile Strength | 34.5 | MPa | ASTM D638 |
| 拉伸应变??拉伸应变 | |||
| 屈服??屈服 | 4.0 到 7.0 | % | ASTM D638 |
| 弯曲模量??Flexural Modulus | 1860 | MPa | ASTM D790 |
| 弯曲强度??Flexural Strength | 48.3 | MPa | ASTM D790 |
|
|
额定值??Nominal Value | 单位??Units | 测试方法??Test Method |
| 悬臂梁缺口冲击强度??悬壁梁缺口冲击强度 | |||
| 3.2mm??3.20 mm | 53 | J/m | ASTM D256 |
| 悬臂梁无缺口冲击强度??悬臂梁无缺口冲击强度 | |||
| 3.2 mm??3.20 mm | 530 | J/m | ASTM D4812 |
|
|
额定值??Nominal Value | 单位??Units | 测试方法??Test Method |
| 热变形温度??Deflection Temperature Under Load | ASTM D648 | ||
| 0.45 MPa，未退火??66 psi, Unannealed | 122 | ℃ | ASTM D648 |
| 1.8 MPa，未退火??264 psi, Unannealed | 62.2 | ℃ | ASTM D648 |
|
|
额定值??Nominal Value | 单位??Units | 测试方法??Test Method |
| Renewable Content??Renewable Content | 20 | % | |
