东莞市顺盈塑胶原料有限公司
![](https://img1.51pla.com/51pla/images/202207/5/6be5c76ceadc396abcdfeb1fb7e122c5.jpg)
![](https://img1.51pla.com/51pla/images/202207/5/ac955ac737e1ee306681b2f50e5a532e.jpg)
![](https://img1.51pla.com/51pla/images/202207/5/d84873679490f2d0c9edc72cdc4770cc.jpg)
牌号简介?About |
---|
聚四氟乙烯润滑 ??PTFE Lubricated |
产品描述?Product Description
厂家:美国RTP??RTP Company
类别:PP??PP not specified
加工条件:注射成型??Injection Molding
性能特点:防火阻燃等级HB; 润滑性;???Lubricating,HB
技术参数?Technical Data | |||
---|---|---|---|
|
额定值??Nominal Value | 单位??Units | 测试方法??Test Method |
密度??Specific Gravity | 0.960 | g/cm3 | ASTM D792 |
收缩率??收缩率 | |||
MD:3.2 mm??MD,3.20 mm | 1.0 到 1.8 | % | ASTM D955 |
|
额定值??Nominal Value | 单位??Units | 测试方法??Test Method |
拉伸模量??Tensile Modulus | 2000 | MPa | ASTM D638 |
拉伸强度??Tensile Strength | 32.8 | MPa | ASTM D638 |
拉伸应变??拉伸应变 | |||
屈服??屈服 | > 10 | % | ASTM D638 |
弯曲模量??Flexural Modulus | 1590 | MPa | ASTM D790 |
弯曲强度??Flexural Strength | 44.8 | MPa | ASTM D790 |
|
额定值??Nominal Value | 单位??Units | 测试方法??Test Method |
悬臂梁缺口冲击强度??悬壁梁缺口冲击强度 | |||
3.2mm??3.20 mm | 43 | J/m | ASTM D256 |
悬臂梁无缺口冲击强度??悬臂梁无缺口冲击强度 | |||
3.2 mm??3.20 mm | 480 | J/m | ASTM D4812 |
|
额定值??Nominal Value | 单位??Units | 测试方法??Test Method |
热变形温度??热变形温度 | |||
1.8 MPa,未退火??1.8 MPa,未退火 | 54.4 | ℃ | ASTM D648 |
|
额定值??Nominal Value | 单位??Units | 测试方法??Test Method |
体积电阻率??Volume Resistivity | > 1.0E+14 | ohms·cm | ASTM D257 |
|