东莞市顺盈塑胶原料有限公司
产品描述?Product Description
厂家：美国RTP??RTP Company
类别：PP??PP not specified
加工条件：注射成型??Injection Molding
性能特点：静电放电保护; 导电; 耐候抗UV;???Weather resistance is good,Conductive,Electrostatic discharge protection
紫外线：UV Stabilized
| 技术参数?Technical Data | |||
|---|---|---|---|
|
|
额定值??Nominal Value | 单位??Units | 测试方法??Test Method |
| 密度??Specific Gravity | 1.02 | g/cm3 | ASTM D792 |
| 收缩率??收缩率 | |||
| MD：3.2 mm??MD，3.20 mm | 0.80 到 1.4 | % | ASTM D955 |
|
|
额定值??Nominal Value | 单位??Units | 测试方法??Test Method |
| 拉伸模量??Tensile Modulus | 1380 | MPa | ASTM D638 |
| 拉伸强度??Tensile Strength | 27.6 | MPa | ASTM D638 |
| 拉伸应变??拉伸应变 | |||
| 屈服??屈服 | > 10 | % | ASTM D638 |
| 弯曲模量??Flexural Modulus | 1520 | MPa | ASTM D790 |
| 弯曲强度??Flexural Strength | 37.9 | MPa | ASTM D790 |
|
|
额定值??Nominal Value | 单位??Units | 测试方法??Test Method |
| 悬臂梁缺口冲击强度??悬壁梁缺口冲击强度 | |||
| 3.2mm??3.20 mm | 53 | J/m | ASTM D256 |
| 悬臂梁无缺口冲击强度??悬臂梁无缺口冲击强度 | |||
| 3.2 mm??3.20 mm | 无断裂 | ? | ASTM D4812 |
|
|
额定值??Nominal Value | 单位??Units | 测试方法??Test Method |
| 表面电阻率??Surface Resistivity | 1.0E+8 到 9.9E+9 | ohms | ASTM D257 |
| 体积电阻率??Volume Resistivity | 1.0E+7 到 9.9E+8 | ohms·cm | ASTM D257 |
| 静电衰减??Static Decay | < 0.5 | sec | FTMS 101C 4046.1 |
|
|
额定值??Nominal Value | 单位??Units | 测试方法??Test Method |
| Primary Additive??Primary Additive | 15 | ||
