GELOY CR3020 Resin SABIC Innovative Plastics ASA SAN
GELOY CR7020 Resin SABIC Innovative Plastics ASA
GELOY CR7020 Resin SABIC Innovative Plastics Europe ASA
GELOY CR7020 Resin SABIC Innovative Plastics Asia Pacific ASA
GELOY CR7500 Resin SABIC Innovative Plastics ASA AMSAN
GELOY CR7500 Resin SABIC Innovative Plastics Asia Pacific ASA AMSAN
GELOY CR7500 Resin SABIC Innovative Plastics Europe ASA AMSAN
GELOY CR7520 Resin SABIC Innovative Plastics ASA
GELOY CR7520 Resin SABIC Innovative Plastics Europe ASA
GELOY CR7520 Resin SABIC Innovative Plastics Asia Pacific ASA
GELOY CR8510 Resin SABIC Innovative Plastics ASA
GELOY CR8510 Resin SABIC Innovative Plastics Asia Pacific ASA
GELOY CR8510NP Resin SABIC Innovative Plastics ASA
GELOY EXGY30CP Resin SABIC Innovative Plastics ASA
GELOY FXTW26SK Resin SABIC Innovative Plastics ASA
GELOY FXTW26SK Resin SABIC Innovative Plastics Asia Pacific ASA
GELOY FXTW26SK Resin SABIC Innovative Plastics Europe ASA
GELOY FXTW30CP Resin SABIC Innovative Plastics ASA
GELOY FXTW30PE Resin SABIC Innovative Plastics ASA
GELOY FXW710SK Resin SABIC Innovative Plastics Europe ASA
GELOY FXW751SK Resin SABIC Innovative Plastics ASA PC
GELOY FXW751SK Resin SABIC Innovative Plastics Asia Pacific ASA PC
GELOY FXW751SK Resin SABIC Innovative Plastics Europe ASA PC
GELOY HRA150 Resin SABIC Innovative Plastics Europe ASA
GELOY HRA170 Resin SABIC Innovative Plastics Europe ASA
GELOY HRA170D Resin SABIC Innovative Plastics Europe ASA PC
GELOY HRA222 Resin SABIC Innovative Plastics Europe ASA
GELOY HRA222 Resin SABIC Innovative Plastics ASA
GELOY HRA222 Resin SABIC Innovative Plastics Asia Pacific ASA
GELOY HRA222F Resin SABIC Innovative Plastics Europe ASA PC
GELOY HRA222F Resin SABIC Innovative Plastics ASA PC
GELOY HRA222F Resin SABIC Innovative Plastics Asia Pacific ASA PC
GELOY INP388 Resin SABIC Innovative Plastics ASA AMSAN
GELOY INP983 Resin SABIC Innovative Plastics ASA
GELOY INP984 Resin SABIC Innovative Plastics ASA
GELOY XP4020R Resin SABIC Innovative Plastics Asia Pacific ASA PC
GELOY XP4025 Resin SABIC Innovative Plastics ASA PC
GELOY XP4025 Resin SABIC Innovative Plastics Asia Pacific ASA PC
GELOY XP4034 Resin SABIC Innovative Plastics ASA PC
GELOY XP4034 Resin SABIC Innovative Plastics Asia Pacific ASA PC
GELOY XP4034 Resin SABIC Innovative Plastics Europe ASA
GELOY XP7550 Resin SABIC Innovative Plastics ASA PC
GELOY XP7550 Resin SABIC Innovative Plastics Europe ASA PC
GELOY XP7550 Resin SABIC Innovative Plastics Asia Pacific ASA PC
GELOY XTPM302 Resin SABIC Innovative Plastics Europe ASA PC
GELOY XTPM307 Resin SABIC Innovative Plastics Europe ASA PC
GELOY XTPM309 Resin SABIC Innovative Plastics Europe ASA PC
GELOY XTPM309E Resin SABIC Innovative Plastics Europe ASA PC
GELOY XTPM405 Resin SABIC Innovative Plastics ASA PC
GELOY XTPMFR10 Resin SABIC Innovative Plastics Asia Pacific ASA PC
GELOY XTPMFR15 Resin SABIC Innovative Plastics Europe ASA PC
GELOY XTWE265 Resin SABIC Innovative Plastics ASA
GELOY XTWE265 Resin SABIC Innovative Plastics Asia Pacific ASA
GELOY XTWE265 Resin SABIC Innovative Plastics Europe ASA
GELOY XTWE270M Resin SABIC Innovative Plastics Asia Pacific ASA SAN
GELOY XTWE280 Resin SABIC Innovative Plastics ASA
GELOY XTWE280 Resin SABIC Innovative Plastics Asia Pacific ASA
GELOY XTWE280 Resin SABIC Innovative Plastics Europe ASA
GELOY XTWE480 Resin SABIC Innovative Plastics Asia Pacific ASA
GELOY XTWM200 Resin SABIC Innovative Plastics ASA
GELOY XTWM200 Resin SABIC Innovative Plastics Europe ASA
GELOY XTWM200 Resin SABIC Innovative Plastics Asia Pacific ASA
GELOY XTWM206 Resin SABIC Innovative Plastics ASA
GELOY XTWM206 Resin SABIC Innovative Plastics Europe ASA
GELOY XTWM206 Resin SABIC Innovative Plastics Asia Pacific ASA
GELOY CR8510 resin
丙烯腈-苯乙烯-丙烯酸酯
产品说明：
ASA with outstanding UV exposure performance for both exterior and interior applications. F1 Rated.
GELOY CR8510 resin 物性表
| 物理性能 |
额定值 |
单位制 |
测试方法 |
| 比重 |
|
|
|
| -- |
1.08 |
g/cm3 |
ASTM D792 |
| -- |
1.07 |
g/cm3 |
ISO 1183 |
| 熔流率（熔体流动速率） |
|
|
ASTM D1238 |
| 220°C/10.0 kg |
6.3 |
g/10 min |
ASTM D1238 |
| 260°C/5.0 kg |
11 |
g/10 min |
ASTM D1238 |
| 280°C/3.8 kg |
7.8 |
g/10 min |
ASTM D1238 |
| 溶化体积流率（MVR） |
|
|
ISO 1133 |
| 220°C/10.0 kg |
6.00 |
cm3/10min |
ISO 1133 |
| 260°C/5.0 kg |
10.0 |
cm3/10min |
ISO 1133 |
| 收缩率 - 流动(3.20 mm) |
0.50 到 0.80 |
% |
内部方法 |
| 吸水率 |
|
|
ISO 62 |
| 饱和, 23°C |
0.50 |
% |
ISO 62 |
| 平衡, 23°C, 50% RH |
0.20 |
% |
ISO 62 |
| 室外适用性 |
f1 |
|
UL 746C |
| 硬度 |
额定值 |
单位制 |
测试方法 |
| 洛氏硬度(R 级) |
93 |
|
ASTM D785 |
| 机械性能 |
额定值 |
单位制 |
测试方法 |
| 拉伸模量 |
|
|
|
| --1 |
1970 |
MPa |
ASTM D638 |
| --2 |
2080 |
MPa |
ASTM D638 |
| -- |
2040 |
MPa |
ISO 527-2/1 |
| 抗张强度 |
|
|
|
| 屈服3 |
40.0 |
MPa |
ASTM D638 |
| 屈服 |
43.0 |
MPa |
ISO 527-2/50 |
| 断裂4 |
33.0 |
MPa |
ASTM D638 |
| 断裂 |
19.0 |
MPa |
ISO 527-2/50 |
| 伸长率 |
|
|
|
| 屈服5 |
3.6 |
% |
ASTM D638 |
| 屈服 |
3.3 |
% |
ISO 527-2/50 |
| 断裂6 |
60 |
% |
ASTM D638 |
| 断裂 |
35 |
% |
ISO 527-2/50 |
| 弯曲模量 |
|
|
|
| 50.0 mm 跨距7 |
2170 |
MPa |
ASTM D790 |
| --8 |
2060 |
MPa |
ISO 178 |
| 弯曲应力 |
|
|
|
| -- |
64.0 |
MPa |
ISO 178 |
| 屈服, 50.0 mm 跨距9 |
68.0 |
MPa |
ASTM D790 |
| 冲击性能 |
额定值 |
单位制 |
测试方法 |
| 简支梁缺口冲击强度10(23°C) |
14 |
kJ/m2 |
ISO 179/1eA |
| 悬壁梁缺口冲击强度 |
|
|
|
| -30°C |
60 |
J/m |
ASTM D256 |
| 23°C |
400 |
J/m |
ASTM D256 |
| -30°C11 |
6.0 |
kJ/m2 |
ISO 180/1A |
| 23°C12 |
15 |
kJ/m2 |
ISO 180/1A |
| 装有测量仪表的落镖冲击 |
|
|
ASTM D3763 |
| -30°C, Total Energy |
4.00 |
J |
ASTM D3763 |
| 23°C, Total Energy |
30.0 |
J |
ASTM D3763 |
| 热性能 |
额定值 |
单位制 |
测试方法 |
| 载荷下热变形温度 |
|
|
|
| 0.45 MPa, 未退火, 3.20 mm |
103 |
°C |
ASTM D648 |
| 0.45 MPa, 未退火, 64.0 mm 跨距13 |
103 |
°C |
ISO 75-2/Bf |
| 1.8 MPa, 未退火, 3.20 mm |
90.0 |
°C |
ASTM D648 |
| 1.8 MPa, 未退火, 100 mm 跨距14 |
88.0 |
°C |
ISO 75-2/Ae |
| 1.8 MPa, 未退火, 64.0 mm 跨距15 |
89.0 |
°C |
ISO 75-2/Af |
| 维卡软化温度 |
|
|
|
| -- |
98.0 |
°C |
ASTM D152516 |
| -- |
102 |
°C |
ISO 306/B50 |
| -- |
105 |
°C |
ISO 306/B120 |
| Ball Pressure Test17(98°C) |
Pass |
|
IEC 60695-10-2 |
| 线形热膨胀系数 |
|
|
ASTM E831, ISO 11359-2 |
| 流动 : -40 到 40°C |
8.4E-5 |
cm/cm/°C |
ASTM E831, ISO 11359-2 |
| 横向 : -40 到 40°C |
9.5E-5 |
cm/cm/°C |
ASTM E831, ISO 11359-2 |
| 电气性能 |
额定值 |
单位制 |
测试方法 |
| 耗散因数 |
|
|
ASTM D150 |
| 100 kHz |
0.018 |
|
ASTM D150 |
| 1 MHz |
0.026 |
|
ASTM D150 |
| 漏电起痕指数 |
600 |
V |
IEC 60112 |
| 可燃性 |
额定值 |
单位制 |
测试方法 |
| UL 阻燃等级(1.50 mm) |
HB |
|
UL 94 |
| 光学性能 |
额定值 |
|
测试方法 |
| Gardner光泽度(60°, 无织构) |
94 |
|
ASTM D523 |
| 注射 |
额定值 |
单位制 |
|
| 干燥温度 |
85.0 到 90.0 |
°C |
|
| 干燥时间 |
4.0 |
hr |
|
| 干燥时间，最大 |
8.0 |
hr |
|
| 建议的最大水分含量 |
0.040 |
% |
|
| 建议注射量 |
40 到 80 |
% |
|
| 料筒后部温度 |
215 到 250 |
°C |
|
| 料筒中部温度 |
220 到 255 |
°C |
|
| 料筒前部温度 |
230 到 260 |
°C |
|
| 射嘴温度 |
220 到 255 |
°C |
|
| 加工（熔体）温度 |
240 到 270 |
°C |
|
| 模具温度 |
60.0 到 85.0 |
°C |
|
| 背压 |
0.300 到 1.00 |
MPa |
|
| 螺杆转速 |
30 到 80 |
rpm |
|
| 排气孔深度 |
0.038 到 0.076 |
mm |
|
| 备注 |
| 1 . |
5.0 mm/min |
| 2 . |
50 mm/min |
| 3 . |
类型 1, 50 mm/min |
| 4 . |
类型 1, 50 mm/min |
| 5 . |
类型 1, 50 mm/min |
| 6 . |
类型 1, 50 mm/min |
| 7 . |
1.3 mm/min |
| 8 . |
2.0 mm/min |
| 9 . |
1.3 mm/min |
| 10 . |
80*10*4 sp=62mm |
| 11 . |
80*10*4 |
| 12 . |
80*10*4 |
| 13 . |
80*10*4 mm |
| 14 . |
120*10*4 mm |
| 15 . |
80*10*4 mm |
| 16 . |
标准 B (120°C/h), 载荷2 (50N) |
| 17 . |
Approximate maximum |
