拜耳Bayblend系列PC/ABS详细说明

PC/ABS，聚碳酸酯和丙烯腈-丁二烯-苯乙烯共聚物和混合物，是由PC和ABS合金而成的热可塑性塑胶，结合了两种材料的优异特性，ABS材料的成型性和PC的机械性、冲击强度和耐温、抗紫外线（UV）等性质，可广泛使用在汽车内部零件、事务机器、通信器材、家电用品及照明设备上。

典型应用范围:手机外壳、计算机和商业机器壳体、电器设备、草坪园艺机器、汽车零件仪表板、内部装修以及车轮盖）。 　　

注塑模工艺条件:干燥处理：加工前的干燥处理是必须的。湿度应小于0.04%，建议干燥条件为90~110C，2~4小时。熔化温度： 230~300C。模具温度：50~100C。注射压力：取决于塑件。注射速度：尽可能地高。 　　

化学和物理特性: PC/ABS具有PC和ABS两者的综合特性。例如ABS的易加工特性和PC的优良机械特性和热稳定性。二者的比率将影响PC/ABS材料的热稳定性。PC/ABS这种混合材料还显示了优异的流动特性。收缩率在0.5%左右。

拜耳PC/ABS Bayblend同系列型号介绍

Bayblend FR3000 (PC+ABS) blend; unreinforced; flame-retardant; injection molding grade

Bayblend FR3000 HI (PC+ABS) blend; unreinforced; flame-retardant

Bayblend FR3002 (PC+ABS) blend; unreinforced; flame-retardant

Bayblend FR3005 BBS310 (PC+ABS) blend; unreinforced; flame-retardant

Bayblend FR3005 HF (PC+ABS) blend; unreinforced; flame-retardant; injection molding grade

Bayblend FR3005 HG (PC+ABS) blend; unreinforced; flame-retardant

Bayblend FR3006 HF (PC+ABS) blend; unreinforced; flame-retardant

Bayblend FR3008 (PC+ABS) blend; unreinforced; flame-retardant

Bayblend FR3008 HR (PC+ABS) blend; unreinforced; flame-retardant

Bayblend FR3009 (PC+ABS) blend; unreinforced; flame-retardant

Bayblend FR3010 (PC+ABS) blend; unreinforced; flame-retardant

Bayblend FR3020 (PC+ABS) blend; 5 % mineral filled; flame retardant

Bayblend FR3030 (PC+ABS) blend; unreinforced; flame-retardant

Bayblend KU2-1514 (PC+ABS) blend; unreinforced; flame-retardant;

Bayblend R-FR610 Flame retardant recyclate grade; Vicat/B 120 temperature 100 °C

Bayblend T50 XF (PC+ABS) blend; unreinforced; injection molding grade;

Bayblend T65 AT (PC+ABS) blend; unreinforced; injection molding grade;

Bayblend T65 HI (PC+ABS) blend; unreinforced; grade with improved low-temperature impact strength

Bayblend T65 PG (PC+ABS) blend; unreinforced; injection molding grade;

Bayblend T65 XF (PC+ABS) blend; unreinforced; general purpose injection molding grade

Bayblend T80 XG (PC+ABS) blend; unreinforced; injection molding grade;

Bayblend T85 XF (PC+ABS) blend; unreinforced; injection molding grade;

Bayblend T88 GF-10 Rubber modified (PC+SAN) blend; 10 % glass fiber filled

Bayblend T88 GF-20 Rubber modified (PC+SAN) blend; 20 % glass fiber filled

Bayblend T88 GF-30 Rubber modified (PC+SAN) blend; 31 % glass fiber filled