JSW metal hot melt adhesive film，It is essential, as with all pressure-sensitive tapes, that the surface to which the tape is applied be clean, dry and free of grease and oil.

Shelf life from date of manufacture is based on the product being stored at 70°f(21°c) / 50% relative humidity out of direct sunlight.

Specification compliance is dynamic and should only be used as a general guide. AlwaysJSW metal hot melt adhesive film， confirm that the tape you are interested in currently complies with all specification requirements. Please verify that the product number that you select is available in the proper size and color to meet your specification.

The reactive JSW-JSW plastic hot melt adhesive filmis heated and melted into a fluid under the condition of inhibiting chemical reaction to facilitate coating; the adhesive layer agglomerates after two kinds of adherends are bonded and cooled; afterJSW plastic hot melt adhesive filmreacts with and expands the chain with the help of the moisture in the air and the moisture on the surface of the adherend to form a polymer with high cohesion, making the adhesive force, heat resistance, The resistance to low temperature was significantly improved. Because of its high reactivity,JSW plastic hot melt adhesive filmshows excellent adhesion to a variety of plastics, PMMA, acrylic, glass, metal and other materials.JSW plastic hot melt adhesive filmis used in the electronic and microelectronics industry, tablet frame and touch screen and other plastic substrate bonding.

The heat aging mechanism ofJSW plastic hot melt adhesive film: there are two changes when the adhesive meets heat: 1. Physical change, reversible reaction. The linear thermoplastic adhesive softens and melts, while the cross-linked thermosetting adhesive produces large deformation; 2. The chemical change ofJSW plastic hot melt adhesive filmis irreversible reaction, mainly manifested in thermal decomposition and oxidative decomposition. This is the main reason for the thermal aging of adhesives. The main temperature parameters characterizing these changes are constancy temperature, thermal deformation temperature, melting point and decomposition temperature. When the heat ofJSW plastic hot melt adhesive filmis over, the mechanical strength is significantly reduced; when the heat temperature reaches the peak, the adhesive is permanently damaged and cannot be used. The results show that the curing ofJSW plastic hot melt adhesive filmby water is much more serious than that by heat decomposition. Because the water content is the chemical bond ofJSW plastic hot melt adhesive film, the product generated by curing reaction will be permanently discarded and should not be dissolved for use.

It is estimated that in 2015, the number ofJSW plastic hot melt adhesive filmused in domestic digital manufacturing industry will reach more than 500000 pieces / month, a year-on-year increase of 5.4%; the daily average number of glue used in domestic digital manufacturing industry will be 6 million pieces / year, an increase of 3 million pieces / year over the previous year, a new record ofJSW plastic hot melt adhesive films used in electronic manufacturing industry. Fortunately, the production line of JSWcompany was redesigned and installed in April last year. The production capacity not only keeps up with the demand of glue consumption in the market, but also creates a strong market environment for future development. The growth rate of JSW615hot melt glue consumption in assembly plant is low. As far as the adhesive industry itself is concerned, affected by the low production of hand-held products in the previous year, the traditional adhesive industry will be severely damaged from January to April 2015. This also means that JSWcompany will have a good performance in January April JJSW plastic hot melt adhesive film.

Taiwan JSW brand for this product has many years of research experience and production line use experience, suitable for difficult bonding surface, including fuel, oil and plasticizer surface, provide good heat resistance. JSW plastic hot melt adhesive film is the first choice for high performance metal welding and plastic product bonding. Please visit the website of Dongguan Taimao Electronic Materials Co., LTD for all details

JSW plastic hot melt adhesive film produces high strength, fuel and oil resistant adhesives on highJSWplastic hot melt adhesive film performance metals, plastics, vinyl, wood and other surfaces. This hot melt has a long opening time and extremely high heat resistance, and is available in a variety of sizes to meet your specific production needs. For JSWplastic hot melt adhesive film polypropylene and other LSE plastics has good adhesion jsw plastic hot melt adhesive filmhas good heat resistance, fuel resistance and oil resistance, and has adjustable and positioned opening time. It can be used with a variety of surfaces such as furniture, automotive interiors, outdoor applications and small appliances. It can be used inJSW plastic hot melt adhesive filmwood and lightweight metals. Its 50-second opening time is sufficient for positioning and tuning, and supports the efficient production of many applications. JSW plastic hot melt adhesive film JSW Plastic Hot Melt Adhesive FilmJSW Plastic Hot Melt Adhesive Film is a liquefied thermoplastic adhesive that can be used at both low and high temperatures for head wire fixation and attachment, wire harness attachment, electronic potting, metal and plastic bonding in home appliances. JSW Plastic Hot Melt Adhesive FilmLow temperature hot melt adhesive is suitable for the environment of 250°F/121°C. It is the ideal material for bonding electronics, plastics, cloth and other thermal sensitive materials. Thes used at 380°F/193°C, which is more adhesive than the lowJSW Plastic Hot Melt Adhesive Film. Using a JSW hot melt applicator, the melted adhesive is extruded from the nozzle by pneumatic pressure, a mechanical trigger mechanism, or pressure applied directly to the adhesive. Different nozzles can be used to apply thin, wide strips or narrow, thicknesses.

JSW plastic hot melt adhesive film. generally sets very quickly, from a few seconds to a few minutes, depending on the formula of the adhesive. And the speed of use and the temperature of the glue gun. Surface Understanding of Taiwanese brands through science and innovation, in our JSW Industrial Adhesives and Tapes Division, we apply the science of bonding JSW plastic hot melt adhesive filmagents to provide innovative solutions that improve the design and manufacturing processes of companies around the world. Finally, our technology helps customers like you deliver competitive products to market faster and more efficiently. Category of Use: Tape, Adhesive, Material: Glue, Adhesive, Applicator, Manufacturer: JSW plastic hot melt adhesive film Series,JSW plastic hot melt adhesive filmSeries,