江苏普及塑料有限公司
| 牌号简介About |
|---|
| lnp*stat-kon*oep32是一种基于pps-线性树脂的化合物，含有聚四氟乙烯、碳纤维、硅树脂。这种材料的附加特性包括：导电性。也称为：lnp*stat-kon*复合ocl-4532 lex产品重新订购名称：oep32 LNP STAT-KON* OEP32 is a compound based on PPS - Linear resin containing 10% Carbon Fiber, 15% PTFE/Silicone. Added features of this material include: Electrically Conductive, Wear Resistant. |
产品描述Product Description
厂家：沙特沙伯基础SABIC
类别：PPSPPS
性能特点：导电; 润滑性; 线性高分子结构;Conductive,Lubricating,Linear polymer structure
填料：PTFE/碳纤维
| 技术参数Technical Data | |||
|---|---|---|---|
|
|
额定值Nominal Value | 单位Units | 测试方法Test Method |
| 密度Specific Gravity | 1.41 | g/cm3 | ASTM D792 , ISO 1183 |
| 收缩率Molding Shrinkage | |||
| MD：24 hrsFlow : 24 hr | 0.50 到 0.70 | % | ASTM D955 |
| TD：24 hrsAcross Flow : 24 hr | 0.60 到 0.80 | % | ASTM D955 |
| TD：24 hrs横向流量 : 24小时 | 0.60 到 0.80 | % | ISO 294-4 |
| MD：24 hrs流量 : 24小时 | 0.50 到 0.70 | % | ISO 294-4 |
|
|
额定值Nominal Value | 单位Units | 测试方法Test Method |
| 拉伸模量Tensile Modulus | |||
| ---- 22 | 11200 | MPa | ASTM D638 |
| ---- | 11200 | MPa | ISO 527-1-2 |
| 拉伸强度Tensile Strength | |||
| 断裂Break | 127 | MPa | ASTM D638 |
| 断裂Break | 125 | MPa | ISO 527-2 |
| 拉伸应变Tensile Elongation | |||
| 断裂Break | 1.6 | % | ASTM D638 |
| 断裂Break | 1.4 | % | ISO 527-2 |
| 弯曲模量Flexural Modulus | |||
| ---- | 9720 | MPa | ASTM D790 |
| ---- | 9740 | MPa | ISO 178 |
| 弯曲强度Flexural Strength | |||
| ---- | 168 | MPa | ASTM D790 |
| ---- | 172 | MPa | ISO 178 |
| 摩擦系数Coefficient of Friction | ASTM D3702 Modified | ||
| 动态Dynamic | 0.32 | ASTM D3702 Modified | |
| 静态Static | 0.33 | ASTM D3702 Modified | |
| 磨损因数磨损因数 | |||
| WasherWasher | 39.0 | 10^-10 in^5-min/ft-lb-hr | ASTM D3702 Modified |
|
|
额定值Nominal Value | 单位Units | 测试方法Test Method |
| 悬臂梁缺口冲击强度Notched Izod Impact Strength | |||
| 23℃23°C | 37 | J/m | ASTM D256 |
| 23℃23°C 33 | 5.4 | kJ/m2 | ISO 180-1A |
| 悬臂梁无缺口冲击强度Unnotched Izod Impact (Area) | |||
| 23℃23°C | 430 | J/m | ASTM D4812 |
| 23℃23°C 33 | 24 | kJ/m2 | ISO 180/1U |
| 装有测量仪表的落镖冲击Instrumented Dart Impact | |||
| 23℃，Energy at Peak Load23°C, Energy at Peak Load | 8.40 | J | ASTM D3763 |
| ---- | 2.53 | J | ISO 6603-2 |
|
|
额定值Nominal Value | 单位Units | 测试方法Test Method |
| 表面电阻率Surface Resistivity | 1.0E+2 到 1.0E+4 | ohms | ASTM D257 |
