原包供应LDPE/台湾聚合/NA208/薄膜级/透明LDPE 高熔指|价格|厂家|多少钱-全球塑胶网-移动端

牌号简介About
PAXOTHENE? NA208（LDPE）具有优异的熔体流动特性、高光泽、良好的韧性和刚度，特别适用于要求外观优良、中等韧性和刚度的注塑应用，如家庭用品、玩具、圣诞灯插座或塑料树的主干等。该树脂具有优异的熔体流动特性。TIC允许经济型模具的短周期时间。PAXOTHENE? NA208也可以磨成粉末进行涂层。 PAXOTHENE NA208 (LDPE) having excellent melt flow characteristic, high gloss, good toughness and stiffness, is especially used for injection molding applications requiring excellent appearance, medium toughness and stiffness, such as housewares, toys, Christmas light sockets or main stems of plastic trees, etc. The resin's excellent melt flow characteristics permit short cycle time for economical moldings. PAXOTHENE NA208 can also be ground into powder for coating.

牌号简介About

PAXOTHENE? NA208（LDPE）具有优异的熔体流动特性、高光泽、良好的韧性和刚度，特别适用于要求外观优良、中等韧性和刚度的注塑应用，如家庭用品、玩具、圣诞灯插座或塑料树的主干等。该树脂具有优异的熔体流动特性。TIC允许经济型模具的短周期时间。PAXOTHENE? NA208也可以磨成粉末进行涂层。 PAXOTHENE NA208 (LDPE) having excellent melt flow characteristic, high gloss, good toughness and stiffness, is especially used for injection molding applications requiring excellent appearance, medium toughness and stiffness, such as housewares, toys, Christmas light sockets or main stems of plastic trees, etc. The resin's excellent melt flow characteristics permit short cycle time for economical moldings. PAXOTHENE NA208 can also be ground into powder for coating.

产品描述Product Description

厂家：台湾台聚USI Corporation

类别：LDPELDPE

用途：装饰部件;家用货品;玩具;涂层应用;

加工条件：涂层

性能特点：机械强度好; 成型周期快; 表面光泽度好; 韧性好; 低密度; 易流动;Good Rigidity,Good flexibility,Good surface appearance,Good liquidity,Quick molding cycle,Low density

技术参数Technical Data
物理性能	额定值Nominal Value	单位Units	测试方法Test Method
密度Density	0.918	g/cm3	ASTM D1505
熔体质量流动速率Melt Mass-Flow Rate (MFR)	22	g/10min	ASTM D1238
热性能	额定值Nominal Value	单位Units	测试方法Test Method
脆化温度Brittleness Temperature	-60.0	℃	ASTM D746
维卡软化温度Vicat Softening Temperature	96.0	℃	ASTM D1525
熔融峰值温度Peak Melting Temperature	108	℃	ASTM D3418
机械性能	额定值Nominal Value	单位Units	测试方法Test Method
邵氏硬度邵氏硬度
邵氏 D邵氏 D	53		ASTM D2240
拉伸强度Tensile Strength			ASTM D638
屈服，注塑成型Yield, Injection Molded	12.6	MPa	ASTM D638
断裂，注塑成型Break, Injection Molded	9.22	MPa	ASTM D638
拉伸应变拉伸应变
断裂，注塑成型断裂，注塑	130	%	ASTM D638

备注