东莞市常平浩云塑胶经营部
TITANPRO 6331 PP
TITANPRO 6423 PP
TITANPRO 6431 PP
TITANPRO 6531M PP
TITANPRO 7523 PP
TITANPRO EPC40R PP
TITANPRO PD701 PP
TITANPRO PD855 PP
TITANPRO PD859 PP
TITANPRO PD943 PP
TITANPRO PJ914 PP
TITANPRO PJ916 PP
TITANPRO PM133 PP
TITANPRO PM163 PP
TITANPRO PM200 PP
TITANPRO PM201 PP
TITANPRO PM202 PP
TITANPRO PM255 PP
TITANPRO PM383 PP
TITANPRO PM430 PP
TITANPRO PM655 PP
TITANPRO PM801 PP
TITANPRO PM802 PP
TITANPRO PM803 PP
TITANPRO PM925 PP
TITANPRO PX617 PP
TITANPRO SJ910 PP
TITANPRO SJ939 PP
TITANPRO SM128 PP
TITANPRO SM240 PP
TITANPRO SM256 PP
TITANPRO SM340 PP
TITANPRO SM340V PP
TITANPRO SM388 PP
TITANPRO SM398 PP
TITANPRO SM461 PP
TITANPRO SM462 PP
TITANPRO SM463 PP
TITANPRO SM488 PP
TITANPRO SM498 PP
TITANPRO SM511C PP
TITANPRO SM546 PP
TITANPRO SM598 PP
TITANPRO SM668 PP
TITANPRO SM669 PP
TITANPRO SM701 PP
TITANPRO SM790 PP
TITANPRO SM791 PP
TITANPRO SM840 PP
TITANPRO SM850 PP
TITANPRO SM950 PP
TITANPRO PM803
聚丙烯均聚物
Lotte Chemical Titan (M) Sdn. Bhd.
产品说明：
Polypropylene homopolymer. Titanpro PM803 is a high flow and also a controlled rheology grade. The base resin meets the requirements of the U.S. Food and Drug Administration as specified in 21 CFR 177.1520(a)(1)(i) and (c)1.1a. The adjuvant meet their respective FDA regulations and 21 CFR 177.1520(b). In summary, this resin meets the FDS criteria covering safe use of polyolefin articles and component of articles intended for food contact use. TSCA Registry: CAS# 9003-07-0
APPLICATIONS:
Thin walled injection molding (TWIM) articles and disposable containers and lids, party plates, pen barrels.
Characteristics:
Low molded in stress, good clarity, good balance of stiffness and impact strength, specifically designed for short cycle time and low warpage.
FABRICATION:
Equipment - ram or screw injection machines and techniques - standard processing.
APPLICATIONS:
Thin walled injection molding (TWIM) articles and disposable containers and lids, party plates, pen barrels.
Characteristics:
Low molded in stress, good clarity, good balance of stiffness and impact strength, specifically designed for short cycle time and low warpage.
FABRICATION:
Equipment - ram or screw injection machines and techniques - standard processing.
TITANPRO PM803 物性表
| 基本信息 | |
|---|---|
| 特性 |
|
| 用途 |
|
| 机构评级 |
|
| 加工方法 |
|
| 物理性能 | 额定值 | 单位制 | 测试方法 |
|---|---|---|---|
| 密度 | 0.900 | g/cm3 | ASTM D1505 |
| 熔流率（熔体流动速率）(230°C/2.16 kg) | 50 | g/10 min | ASTM D1238 |
| 吸水率(24 hr) | 0.020 | % | ASTM D570 |
| 硬度 | 额定值 | 单位制 | 测试方法 |
|---|---|---|---|
| 洛氏硬度(R 级) | 108 | ASTM D785 |
| 机械性能 | 额定值 | 单位制 | 测试方法 |
|---|---|---|---|
| 抗张强度(屈服) | 34.3 | MPa | ASTM D638 |
| 伸长率(屈服) | 10 | % | ASTM D638 |
| 弯曲模量 | 1770 | MPa | ASTM D790B |
| 冲击性能 | 额定值 | 单位制 | 测试方法 |
|---|---|---|---|
| 悬壁梁缺口冲击强度(23°C) | 20 | J/m | ASTM D256A |
| 热性能 | 额定值 | 单位制 | 测试方法 |
|---|---|---|---|
| 载荷下热变形温度(0.45 MPa, 未退火) | 120 | °C | ASTM D648 |
