东莞市常平浩云塑胶经营部
TIPPLEN H 145 F PP
TIPPLEN H 388 F PP
TIPPLEN H 483 F PP
TIPPLEN H 543 F PP
TIPPLEN H 649 FH PP
TIPPLEN H 650 F PP
TIPPLEN H 659 F PP
TIPPLEN H 681 F PP
TIPPLEN H 781 F PP
TIPPLEN H 890 PP
TIPPLEN H 916 A PP
TIPPLEN H 949 A PP
TIPPLEN K 1150 A PP
TIPPLEN K 199 PP
TIPPLEN K 295 A PP
TIPPLEN K 395 A PP
TIPPLEN K 499 PP
TIPPLEN K 597 PP
TIPPLEN K 691 PP
TIPPLEN K 693 PP
TIPPLEN K 793 PP
TIPPLEN K 850 PP
TIPPLEN K 899 PP
TIPPLEN K 948 PP
TIPPLEN R 1059 A PP
TIPPLEN R 159 A TST PP
TIPPLEN R 351 F PP
TIPPLEN R 359 PP
TIPPLEN R 450 F PP
TIPPLEN R 659 PP
TIPPLEN R 789 PP
TIPPLEN R 959 A PP
TIPPLEN? H 483 F
聚丙烯均聚物
MOL Petrochemicals Co. Ltd.
产品说明：
TIPPLEN H 483 F is a homopolymer polypropylene with medium molecular weight, good mechanical properties and outstanding processability.
TIPPLEN H 483 F is recommended for split film yarns for ropes and twines, monofilaments. Film yarns are used e.g. in brush, broom filling and technical applications. This grade is also recommended for cast films and sheets, furthermore for injection moulded products (such as caps, household articles, packaging materials).
TIPPLEN H 483 F is suitable for food contact. The product complies with Food Contact Regulations.
TIPPLEN H 483 F is recommended for split film yarns for ropes and twines, monofilaments. Film yarns are used e.g. in brush, broom filling and technical applications. This grade is also recommended for cast films and sheets, furthermore for injection moulded products (such as caps, household articles, packaging materials).
TIPPLEN H 483 F is suitable for food contact. The product complies with Food Contact Regulations.
TIPPLEN H 483 F 物性表
| 基本信息 | |
|---|---|
| 特性 |
|
| 用途 |
|
| 形式 |
|
| 加工方法 |
|
| 物理性能 | 额定值 | 单位制 | 测试方法 |
|---|---|---|---|
| 熔流率（熔体流动速率）(230°C/2.16 kg) | 6.5 | g/10 min | ISO 1133 |
| 硬度 | 额定值 | 单位制 | 测试方法 |
|---|---|---|---|
| 洛氏硬度(R 计秤) | 98 | ISO 2039-2 |
| 机械性能 | 额定值 | 单位制 | 测试方法 |
|---|---|---|---|
| 拉伸模量(注塑) | 1600 | MPa | ISO 527-2 |
| 拉伸应力(屈服, 注塑) | 34.5 | MPa | ISO 527-2 |
| 拉伸应变(屈服, 注塑) | 10 | % | ISO 527-2 |
| 弯曲模量(注塑) | 1700 | MPa | ISO 178 |
| 冲击性能 | 额定值 | 单位制 | 测试方法 |
|---|---|---|---|
| 悬壁梁缺口冲击强度(23°C, 注塑) | 4.0 | kJ/m2 | ISO 180/A |
| 热性能 | 额定值 | 单位制 | 测试方法 |
|---|---|---|---|
| 热变形温度(0.45 MPa, 未退火) | 94.0 | °C | ISO 75-2/B |
| 注射 | 额定值 | 单位制 | |
|---|---|---|---|
| 加工（熔体）温度 | 190 到 240 | °C |
| 挤出 | 额定值 | 单位制 | |
|---|---|---|---|
| 熔体温度 | 190 到 240 | °C |
