江苏普及塑料有限公司
| 牌号简介About |
|---|
| UBE Nylon 1013B (干燥 ) 是一种聚酰胺6（尼龙6）产品,。 它可以通过注射成型进行加工,在北美洲有供货。 特性包括: 阻燃/额定火焰 耐化学品 优良的脱模剂 坚硬 耐冲击 UBE Nylon 1013B粘度低 (Injection) UBE Nylon 1013B (Dry) UBE Nylon 1013B is a Polyamide 6 (Nylon 6) product. It can be processed by injection molding and is available in North America. Characteristics include: Flame Rated Chemical Resistant Good Mold Release Heat Resistant Impact Resistant UBE Nylon 1013B Low viscosity (Injection) |
产品描述Product Description
厂家：日本宇部UBE America, Inc.
类别：PA6PA6
加工条件：注射成型Injection Molding
性能特点：自润滑; 耐磨; 机械强度好; 耐油; 含脱模剂; 耐化学性; 耐高温; 减震; 低粘度; 冲击性能好;Good Rigidity,High impact resistance,Low Viscosity,noise reduction,Good stripping performance,Self-lubricating,High Heat Resistance,Good wear resistance,Grease resistance,Solvent resistance
| 技术参数Technical Data | |||
|---|---|---|---|
|
|
额定值Nominal Value | 单位Units | 测试方法Test Method |
| 拉伸强度拉伸应力@屈服 | |||
| 屈服 | 80 | MPa | ISO 527-1-2 |
| 拉伸应变拉伸应变 | |||
| 断裂断裂 | 40 | % | ISO 527-1/2 |
| 拉伸模量Tensile Modulus | 2900 | MPa | ISO 527-1-2 |
| 弯曲强度Flexural Strength | 110 | MPa | ISO 178 |
| 弯曲模量Flexural Modulus | 2700 | MPa | ISO 178 |
| 洛氏硬度Rockwell Hardness | |||
| R 级R | 120 | ISO 2039-2 | |
| M 级M | 80 | ISO 2039-2 | |
|
|
额定值Nominal Value | 单位Units | 测试方法Test Method |
| 熔融温度Melting Temperature | 215~225 | ℃ | ISO 11357 |
| 线性热膨胀系数Linear Expansion Coefficient | 8 | x10-5/℃ | ISO 11359-2 |
| 热变形温度Heat Deflection Temperature | |||
| 0.45 MPa0.45 MPa | 155 | ℃ | ISO 75-1/2 |
| 1.8 MPa1.8 MPa | 60 | ℃ | ISO 75-1/2 |
|
|
额定值Nominal Value | 单位Units | 测试方法Test Method |
| 体积电阻率Volume Resistivity | 10^15 | ohms·cm | JIS K6911 |
| 介电强度Electric Strength | 20 | kV/mm | IEC 60243-1 |
| 相对电容率相对介电常数 | 3.5 | IEC 60250 | |
| 耐电弧性Arc Resistance | 119 | sec | ASTM D495 |
| 相比漏电起痕指数相对漏电起痕指数 | 0 | UL index | UL746A |
|
|
额定值Nominal Value | 单位Units | 测试方法Test Method |
| 吸水率Water Absorption | 2.5 | % | UBE 方法 |
|
|
额定值Nominal Value | 单位Units | 测试方法Test Method |
| 简支梁缺口冲击强度Charpy Notched Impact Strength | 5 | ISO 179-1eA | |
|
|
额定值Nominal Value | 单位Units | 测试方法Test Method |
| 收缩率模具收缩率 | |||
| MDMD | 1.4 | % | 内部方法 |
| TDTD | 1.5 | % | 内部方法 |
| 密度Density | 1.14 | g/cm3 | ISO 1183-3 |
PA6 日本东丽CM1030/CM1031/CM1017
