江苏普及塑料有限公司
| 牌号简介About |
|---|
| Amilan? CM1001R是一种聚酰胺6（尼龙6）产品,含有的填充物为40% 矿物填料。 它,在北美洲、欧洲或亚太地区有供货。 特性包括: 阻燃/额定火焰 抗翘曲 Amilan? CM1001R is a Polyamide 6 (Nylon 6) product filled with 40% mineral. It is available in Asia Pacific, Europe, or North America. Characteristics include: Flame Rated Warp Resistant |
产品描述Product Description
厂家：日本东丽Toray Plastics (Malaysia) Sdn. Bhd.
类别：PA6PA6
性能特点：低翘曲性;Low warping
填料：矿物 40
| 技术参数Technical Data | |||
|---|---|---|---|
|
|
额定值Nominal Value | 单位Units | 测试方法Test Method |
| 密度Specific Gravity | 1.51 | g/cm3 | ISO 1183 |
| 吸水率Water Absorption | |||
| 23℃，24hr(23°C, 24 hr) | 0.90 | % | ISO 62 |
|
|
额定值Nominal Value | 单位Units | 测试方法Test Method |
| 热变形温度Heat Deflection Temperature | |||
| 0.45 MPa，未退火0.45MPa 未退火 | 203 | ℃ | ISO 75-2/Bf |
| 1.8 MPa，退火1.80MPa 退火 | 173 | ℃ | ISO 75-2/Af |
| 线性热膨胀系数线膨胀系数 | |||
| MDMD | 8.0E-5 | 1/℃ | ISO 11359-2 |
|
|
额定值Nominal Value | 单位Units | 测试方法Test Method |
| 体积电阻体积电阻 | 1.0E 15 | Ω.cm | IEC 60093 |
| 绝缘强度绝缘强度 | |||
| 3.00 mm3.00 mm | 21 | KV/mm | IEC 60243-1 |
| 介电常数Dielectric Constant | |||
| 23℃23°C | 4.5 | 1 kHz | IEC 60250 |
| 23℃23°C | 3.8 | 1 MHz | IEC 60250 |
| 耗散因数Dissipation Factor | |||
| 23℃ 23°C | 0.03 | 1 kHz | IEC 60250 |
| 23℃ 23°C | 0.02 | 1 MHz | IEC 60250 |
|
|
额定值Nominal Value | 单位Units | 测试方法Test Method |
| 阻燃等级防火等级 | |||
| 0.75 mm | HB | UL-94 | |
| 1.50 mm | HB | UL-94 | |
| 3.00 mm | HB | UL-94 | |
|
|
额定值Nominal Value | 单位Units | 测试方法Test Method |
| 简支梁无缺口冲击强度Charpy Unnotched Impact Strength | |||
| 23℃23°C | 45 | kJ/m2 | ISO 179/1eU |
| -40℃-40°C | 35 | kJ/m2 | ISO 179/1eU |
| 简支梁缺口冲击强度Charpy Notched Impact Strength | |||
| 23℃23°C | 5.0 | kJ/m2 | ISO 179/1eA |
|
|
额定值Nominal Value | 单位Units | 测试方法Test Method |
| 洛氏硬度Rockwell Hardness | 81 | M 级 | ISO 2039-2 |
| 洛氏硬度Rockwell Hardness | 119 | R 级 | ISO 2039-2 |
| 拉伸强度拉伸强度 | |||
| 23℃23°C | 95 | MPa | ISO 527-2 |
| -40℃-40°C | 130 | MPa | ISO 527-2 |
| 拉伸应变Tensile Elongation at Break | |||
| 断裂，23℃23°C | 2.5 | % | ISO 527-2 |
| -40℃-40°C | 2.0 | % | ISO 527-2 |
| 弯曲强度Flexural Strength | |||
| 23℃23°C | 145 | MPa | ISO 178 |
| -40℃-40°C | 160 | MPa | ISO 178 |
| 弯曲模量Flexural Modulus | |||
| 23℃23°C | 5800 | MPa | ISO 178 |
| -40℃-40°C | 6900 | MPa | ISO 178 |
