江苏普及塑料有限公司
| 牌号简介About |
|---|
| 增韧聚酰胺6 Toughened Polyamide 6 |
产品描述Product Description
厂家：美国杜邦DuPont Canada, Inc. - Dartek Division
类别：PA6PA6
加工条件：薄膜挤出Film extrusion
性能特点：热稳定性好;Heat Stabilized
| 技术参数Technical Data | |||
|---|---|---|---|
|
|
额定值Nominal Value | 单位Units | 测试方法Test Method |
| 拉伸模量Tensile Modulus | 900 | MPa | ISO 527-2 |
| 拉伸强度拉伸强度 | |||
| 50% 应变50%应变 | 28.0 | MPa | ISO 527-2 |
| 拉伸应变拉伸应变 | |||
| 断裂断裂 | 50 | % | ISO 527-2 |
| 弯曲模量Flexural Modulus | 900 | MPa | ISO 178 |
|
|
额定值Nominal Value | 单位Units | 测试方法Test Method |
| 简支梁缺口冲击强度Charpy Notched Impact Strength | ISO 179/1eA | ||
| -30℃-30°C | 65 | kJ/m2 | ISO 179/1eA |
| 23℃23°C | 130 | kJ/m2 | ISO 179/1eA |
| 悬臂梁缺口冲击强度悬壁梁缺口冲击强度 | |||
| 23℃23℃ | No Break | ISO 180/1A | |
|
|
额定值Nominal Value | 单位Units | 测试方法Test Method |
| 热变形温度热变形温度 | |||
| 1.8 MPa，未退火1.8 MPa，未退火 | 48.0 | ℃ | ISO 75-2/A |
| 0.45 MPa，未退火0.45 MPa，未退火 | 55.0 | ℃ | ISO 75-2/B |
| 玻璃化转变温度Glass Transition Temperature 22 | 55.0 | ℃ | ISO 11357-2 |
| 熔融温度Melting Temperature 22 | 221 | ℃ | ISO 11357-3 |
|
|
额定值Nominal Value | 单位Units | 测试方法Test Method |
| 燃烧速率燃烧速率3 | |||
| 1 mm1.00 mm3 | 100 | mm/min | ISO 3795 |
| FMVSS 阻燃等级FMVSS Flammability | B | FMVSS 302 | |
|
|
额定值Nominal Value | 单位Units | 测试方法Test Method |
| 密度Density | 1.02 | g/cm3 | ISO 1183 |
| 收缩率Molding Shrinkage | ISO 294-4 | ||
| TDAcross Flow | 1.2 | % | ISO 294-4 |
| MDFlow | 0.80 | % | ISO 294-4 |
| 吸水率吸水率 | |||
| 平衡，23℃，50% RH，2.00 mmEquilibrium，23℃，2.00 mm，50% RH | 1.4 | % | ISO 62 |
| 熔体密度Melt Density | 0.870 | g/cm3 | |
| Specific Heat Capacity of MeltSpecific Heat Capacity of Melt | 2700 | J/kg/℃ | |
| Thermal Conductivity of MeltThermal Conductivity of Melt | 0.16 | W/m/K | |
