江苏普及塑料有限公司
| 牌号简介About |
|---|
| 该树脂是一种热稳定的50%玻璃纤维增强PA6注射成型化合物，具有优异的强度、刚度、高温性能和尺寸稳定性。它可以在自然，黑色耐候和色素版本。应用Ultramid? B3WG10 BK00564通常推荐用于电动工具外壳、牛耳标记器、行李架、风扇和压力调节器外壳等应用。 This resin is a heat stabilized, 50% glass fiber reinforced PA6 injection molding compound offering excellent strength, stiffness, high temperature performance and dimensional stability. It is available in natural, black weather resistant and pigmented versions. Applications Ultramid B3WG10 BK00564 is generally recommended for applications such as power tool housings, cattle ear taggers, luggage frames, fans and pressure regulator housings. |
产品描述Product Description
厂家：德国巴斯夫BASF Polyurethanes GmbH
类别：PA6PA6
用途：皮箱;动力/其它工具;外壳;
颜色：自然色,可用颜色,黑色
加工条件：注射成型Injection Molding
性能特点：机械强度好; 热稳定性好; 耐油; 尺寸稳定性好;Good Rigidity,Good Dimensional Stability,Grease resistance,Heat Stabilized
填料：玻璃纤维 50
| 技术参数Technical Data | |||
|---|---|---|---|
|
|
额定值Nominal Value | 单位Units | 测试方法Test Method |
| 密度Density | 1.56 | g/cm3 | ISO 1183 |
| 吸水率Water Absorption | ISO 62 | ||
| 饱和，23℃Saturation, 73°F | 4.8 | % | ISO 62 |
| 平衡，23℃，50% RHEquilibrium, 73°F, 50% RH | 1.4 | % | ISO 62 |
|
|
额定值Nominal Value | 单位Units | 测试方法Test Method |
| 拉伸模量拉伸模量 | |||
| 23℃23℃ | 16700 | MPa | ISO 527-2 |
| 拉伸强度拉伸强度 | |||
| 断裂，23℃断裂，23℃ | 225 | MPa | ISO 527-2 |
| 拉伸应变拉伸应变 | |||
| 断裂，23℃断裂，23℃ | 2.5 | % | ISO 527-2 |
| 弯曲模量弯曲模量 | |||
| 23℃23℃ | 14500 | MPa | ISO 178 |
| 弯曲强度弯曲强度 | |||
| 23℃23℃ | 345 | MPa | ISO 178 |
|
|
额定值Nominal Value | 单位Units | 测试方法Test Method |
| 简支梁缺口冲击强度简支梁缺口冲击强度 | |||
| 23℃23℃ | 15 | kJ/m2 | ISO 179 |
| 简支梁无缺口冲击强度简支梁无缺口冲击强度 | |||
| 23℃23℃ | 90 | kJ/m2 | ISO 179 |
| 悬臂梁缺口冲击强度Notched Izod Impact Strength | ISO 180 | ||
| -40℃-40°C | 12 | kJ/m2 | ISO 180 |
| 23℃23°C | 15 | kJ/m2 | ISO 180 |
|
|
额定值Nominal Value | 单位Units | 测试方法Test Method |
| 热变形温度Heat Deflection Temperature | |||
| 0.45 MPa，未退火66 psi, Unannealed | 220 | ℃ | ISO 75-2/B |
| 1.8 MPa，未退火264 psi, Unannealed | 215 | ℃ | ISO 75-2/A |
| 熔融温度溶融温度 | |||
| DSCDSC | 220 | ℃ | ISO 3146 |
