江苏普及塑料有限公司
| 牌号简介About |
|---|
| Fortron? 4184L4是目前最坚固和最坚硬的玻璃/矿物增强产品。它在高负荷下具有优异的耐热性和良好的耐化学性。电气性能优良，产品本身具有阻燃性。该产品还提供低蠕变阻力和良好的刚性，由于矿物含量。这种等级的应用包括电子元件（即线轴、连接器和电磁阀）。 Fortron 4184L4 is the strongest and toughest glass/mineral reinforced product available. It offers excellent heat resistance at high loads and good chemical resistance. The electrical properties are excellent and the product is inherently flame-retardant. This product also offers low creep resistance and good rigidity due to the mineral content. Applications made of this grade include electronic components (i.e. bobbins, connectors and solenoid valves). |
产品描述Product Description
厂家：美国塞拉尼斯Celanese EVA Performance Polymers
类别：PPSPPS
用途：阀门/阀门部件;电气/电子应用领域;连接器;
性能特点：防火阻燃等级V-0; 机械强度好; 耐化学性; 耐高温; 阻燃; 电气性好; 韧性好;Good Rigidity,Good flexibility,Good Electrical Properties,Flame Characteristics,High Heat Resistance,Solvent resistance,V-0
填料：玻璃纤维/矿物
| 技术参数Technical Data | |||
|---|---|---|---|
|
|
额定值Nominal Value | 单位Units | 测试方法Test Method |
| 简支梁缺口冲击强度Charpy Notched Impact Strength | ISO 179/1eA | ||
| -30℃-30°C | 7.0 | kJ/m2 | ISO 179/1eA |
| 23℃23°C | 7.0 | kJ/m2 | ISO 179/1eA |
| 简支梁无缺口冲击强度Charpy Unnotched Impact Strength | ISO 179/1eU | ||
| -30℃-30°C | 29 | kJ/m2 | ISO 179/1eU |
| 23℃23°C | 29 | kJ/m2 | ISO 179/1eU |
| 悬臂梁缺口冲击强度Notched Izod Impact Strength | ISO 180/1A | ||
| -30℃-30°C | 7.0 | kJ/m2 | ISO 180-1A |
| 23℃23°C | 7.0 | kJ/m2 | ISO 180-1A |
| 悬臂梁无缺口冲击强度悬臂梁无缺口冲击强度 | |||
| 23℃23℃ | 27 | kJ/m2 | ISO 180/1U |
|
|
额定值Nominal Value | 单位Units | 测试方法Test Method |
| 热变形温度热变形温度 | |||
| 8.0 MPa，未退火8.0 MPa，未退火 | 215 | ℃ | ISO 75-2/C |
| 1.8 MPa，未退火1.8 MPa，未退火 | 265 | ℃ | ASTM D648 |
| 1.8 MPa，未退火1.8 MPa，未退火 | 270 | ℃ | ISO 75-2/A |
| 0.45 MPa，退火0.45 MPa，退火 | 280 | ℃ | ASTM D648 |
| 玻璃化转变温度Glass Transition Temperature 33 | 90.0 | ℃ | ISO 11357-2 |
| 熔融温度Melting Temperature 55 | 280 | ℃ | ISO 11357-3 |
| 线性热膨胀系数线性热膨胀系数 | |||
| TDTD | 3.2E-5 | 1/℃ | ISO 11359-2 |
| MDMD | 2.4E-5 | 1/℃ | ISO 11359-2 |
|
|
额定值Nominal Value | 单位Units | 测试方法Test Method |
| 表面电阻率Surface Resistivity | 1.0E+15 | ohms | IEC 60093 |
| 体积电阻率Volume Resistivity | 1.0E+16 | ohms·cm | ASTM D257 |
| 体积电阻率Volume Resistivity | 1.0E+15 | ohms·cm | IEC 60093 |
| 介电强度Electric Strength 44 | 18 | kV/mm | ASTM D149 |
| 介电强度Electric Strength | 27 | kV/mm | IEC 60243-1 |
| 介电常数Dielectric Constant | ASTM D150 | ||
| 1 kHz1 kHz | 3.80 | ASTM D150 | |
| 1 MHz1 MHz | 3.80 | ASTM D150 | |
| 相对电容率相对电容率 | |||
| 1 MHz1 MHz | 4.70 | IEC 60250 | |
| 耗散因数Dissipation Factor | ASTM D150 | ||
| 1 MHz1 MHz | 2.0E-3 | IEC 60250 | |
| 60 Hz60 Hz | 1.0E-3 | ASTM D150 | |
| 1 kHz1 kHz | 1.0E-3 | ASTM D150 | |
| 1 MHz1 MHz | 8.0E-4 | ASTM D150 | |
| 耐电弧性Arc Resistance | 156 | sec | ASTM D495 |
| 相比漏电起痕指数Comparative Tracking Index | 150 | V | IEC 60112 |
|
|
额定值Nominal Value | 单位Units | 测试方法Test Method |
| 阻燃等级Flame Rating | UL 94 | ||
| 0.75 mm0.75 mm | V-0 | UL 94 | |
| 1.50 mm1.5 mm | V-0 | UL 94 | |
|
|
额定值Nominal Value | 单位Units | 测试方法Test Method |
| Specimen Thickness（Shrinkage）Specimen Thickness - Shrinkage | 3.18 | mm | Internal Method |
|
|
额定值Nominal Value | 单位Units | 测试方法Test Method |
| 拉伸模量Tensile Modulus | 16600 | MPa | ISO 527-2/1A/1 |
| 拉伸强度拉伸强度 | |||
| 断裂，23℃断裂，23℃ | 165 | MPa | ASTM D638 |
| 断裂断裂 | 165 | MPa | ISO 527-2/1A/5 |
| 拉伸应变拉伸应变 | |||
| 断裂，23℃断裂，23℃ | 1.5 | % | ASTM D638 |
| 断裂断裂 | 1.4 | % | ISO 527-2/1A/5 |
| 弯曲模量弯曲模量 | |||
| 23℃23℃ | 16200 | MPa | ISO 178 |
| 弯曲强度Flexural Stress 22 | 250 | MPa | ISO 178 |
| 压缩强度压缩强度 | |||
| 1% 应变，23℃1% Strain，23℃ | 207 | MPa | ASTM D695 |
| 洛氏硬度洛氏硬度 | |||
| M 级M 级 | 100 | ASTM D785 | |
| M 级M 级 | 100 | ISO 2039-2 | |
|
|
额定值Nominal Value | 单位Units | 测试方法Test Method |
| 密度Specific Gravity | 1.80 | g/cm3 | ASTM D792 |
| 特定体积Specific Volume | 0.556 | cm3/g | ASTM D792 |
| 密度Density | 1.80 | g/cm3 | ISO 1183 |
| 收缩率Molding Shrinkage | ISO 294-4 | ||
| TDTD | 0.40 to 0.60 | % | ASTM D955 |
| MDMD | 0.10 to 0.30 | % | ASTM D955 |
| TDAcross Flow | 0.40 to 0.70 | % | ISO 294-4 |
| MDFlow | 0.30 to 0.60 | % | ISO 294-4 |
| 吸水率吸水率 | |||
| 饱和，23℃饱和，23℃ | 0.020 | % | ISO 62 |
| Specific Heat Capacity of MeltSpecific Heat Capacity of Melt | 1600 | J/kg/℃ | Internal Method |
