江苏普及塑料有限公司
?
| 牌号简介About |
|---|
| Fortron? 1200L1是一种主要推荐用于挤压应用的未填充等级。它具有较高的熔体粘度和拉伸伸长。推荐的加工条件与我们的标准未填充等级类似。 Fortron 1200L1 is an unfilled grade recommended primarily for extrusion applications. It has a high melt viscosity and tensile elongation. Recommended processing conditions are similar to those of our standard unfilled PPS grades. |
产品描述Product Description
厂家：美国塞拉尼斯Celanese EVA Performance Polymers
类别：PPSPPS
加工条件：挤出Extrusion
性能特点：拉伸性能好; 高粘度;High Viscosity,Good Tensile Strength
| 技术参数Technical Data | |||
|---|---|---|---|
|
|
额定值Nominal Value | 单位Units | 测试方法Test Method |
| 密度Density | 1.34 | g/cm3 | ISO 1183 |
| 吸水率吸水率 | |||
| 饱和，23℃饱和，23℃ | 0.020 | % | ISO 62 |
| 粘度Viscosity | 430 | Pa·s | 内部方法 |
|
|
额定值Nominal Value | 单位Units | 测试方法Test Method |
| 简支梁无缺口冲击强度简支梁无缺口冲击强度 | |||
| 23℃23℃ | 200 | kJ/m2 | ISO 179/1eU |
|
|
额定值Nominal Value | 单位Units | 测试方法Test Method |
| 玻璃化转变温度Glass Transition Temperature 33 | 90.0 | ℃ | ISO 11357-2 |
| 熔融温度熔融温度 33 | 275 | ℃ | ISO 11357-3 |
| 线性热膨胀系数CLTE | ISO 11359-2 | ||
| MD流动 | 4.0E-5 | 1/℃ | ISO 11359-2 |
| TDTransverse | 4.2E-5 | 1/℃ | ISO 11359-2 |
|
|
额定值Nominal Value | 单位Units | 测试方法Test Method |
| 介电强度Electric Strength | 30 | kV/mm | IEC 60243-1 |
| 介电常数Dielectric Constant | ASTM D150 | ||
| 10 kHz10 kHz | 3.00 | ASTM D150 | |
| 1 MHz1 MHz | 3.00 | ASTM D150 | |
|
|
额定值Nominal Value | 单位Units | 测试方法Test Method |
| 洛氏硬度洛氏硬度 | |||
| M 级M 计秤 | 93 | ISO 2039-2 | |
| 拉伸模量Tensile Modulus | 4000 | MPa | ISO 527-2/1A/1 |
| 拉伸强度拉伸强度 | |||
| 断裂断裂 | 88.0 | MPa | ISO 527-2/1A/50 |
| 拉伸应变Tensile Strain | ISO 527-2/1A/50 | ||
| 屈服Yield | 3.0 | % | ISO 527-2/1A/50 |
| 断裂Break | 15 | % | ISO 527-2/1A/50 |
| 弯曲模量弯曲模量 | |||
| 23℃23℃ | 4100 | MPa | ISO 178 |
| 弯曲强度弯曲强度 | |||
| 23℃23℃ | 141 | MPa | ISO 178 |
