PPS 美国泰科纳 1130L4 加纤30% 阻燃V0级高刚性耐高温 PPS原料|价格|厂家|多少钱-全球塑胶网-移动端

牌号简介About
Fortron? 1130L4是一种30%的玻璃纤维增强聚苯硫醚，具有优异的耐热性和耐化学性。它本身具有阻燃性，硬度高，强度和刚度平衡良好。特别适用于需要较长流动长度的薄壁零件。由于填料含量低，该等级在二次操作中也表现出良好的可焊性。 Fortron 1130L4 is a 30% glass-reinforced PPS that has excellent heat and chemical resistance. It is inherently flame-retardant and exhibits high hardness and a good balance of strength and stiffness. Especially used for thin walled parts requiring long flow lengths. This grade also exhibits excellent weldability in secondary operations due to its low filler content.

牌号简介About

Fortron? 1130L4是一种30%的玻璃纤维增强聚苯硫醚，具有优异的耐热性和耐化学性。它本身具有阻燃性，硬度高，强度和刚度平衡良好。特别适用于需要较长流动长度的薄壁零件。由于填料含量低，该等级在二次操作中也表现出良好的可焊性。 Fortron 1130L4 is a 30% glass-reinforced PPS that has excellent heat and chemical resistance. It is inherently flame-retardant and exhibits high hardness and a good balance of strength and stiffness. Especially used for thin walled parts requiring long flow lengths. This grade also exhibits excellent weldability in secondary operations due to its low filler content.

产品描述Product Description

厂家：美国塞拉尼斯Celanese EVA Performance Polymers

类别：PPSPPS

用途：薄壁部件;

性能特点：防火阻燃等级V-0; 机械强度好; 焊接; 耐化学性; 耐高温; 硬度高; 阻燃;Good Rigidity,Good Hardness,Flame Characteristics,High Heat Resistance,Solvent resistance,Welding,V-0

填料：玻璃纤维 30

技术参数Technical Data
物理性能	额定值Nominal Value	单位Units	测试方法Test Method
密度Specific Gravity	1.60	g/cm3	ASTM D792
特定体积Specific Volume	0.636	cm3/g	ASTM D792
密度Density	1.58	g/cm3	ISO 1183
收缩率Molding Shrinkage			ISO 294-4
TDTD	0.60 to 0.90	%	ASTM D955
MDMD	0.30 to 0.50	%	ASTM D955
TDAcross Flow	0.60 to 0.90	%	ISO 294-4
MDFlow	0.30 to 0.50	%	ISO 294-4
吸水率吸水率
饱和，23℃饱和，23℃	0.020	%	ISO 62
冲击性能	额定值Nominal Value	单位Units	测试方法Test Method
简支梁缺口冲击强度Charpy Notched Impact Strength			ISO 179/1eA
-30℃-30°C	9.0	kJ/m2	ISO 179/1eA
23℃23°C	9.0	kJ/m2	ISO 179/1eA
简支梁无缺口冲击强度Charpy Unnotched Impact Strength			ISO 179/1eU
-30℃-30°C	34	kJ/m2	ISO 179/1eU
23℃23°C	34	kJ/m2	ISO 179/1eU
悬臂梁缺口冲击强度Notched Izod Impact Strength			ISO 180/1A
-30℃-30°C	9.0	kJ/m2	ISO 180-1A
23℃23°C	9.0	kJ/m2	ISO 180-1A
悬臂梁无缺口冲击强度悬臂梁无缺口冲击强度
23℃23℃	30	kJ/m2	ISO 180/1U
热性能	额定值Nominal Value	单位Units	测试方法Test Method
热变形温度热变形温度
1.8 MPa，未退火1.8 MPa，未退火	266	℃	ASTM D648
1.8 MPa，未退火1.8 MPa，未退火	255	℃	ISO 75-2/A
0.45 MPa，退火0.45 MPa，退火	280	℃	ASTM D648
玻璃化转变温度Glass Transition Temperature 33	90.0	℃	ISO 11357-2
线性热膨胀系数线性热膨胀系数
TDTD	5.2E-5	1/℃	ISO 11359-2
MDMD	2.9E-5	1/℃	ISO 11359-2
电气性能	额定值Nominal Value	单位Units	测试方法Test Method
表面电阻率Surface Resistivity	1.0E+15	ohms	IEC 60093
体积电阻率Volume Resistivity	1.0E+16	ohms·cm	ASTM D257
体积电阻率Volume Resistivity	1.0E+15	ohms·cm	IEC 60093
耗散因数Dissipation Factor			ASTM D150
1 kHz1 kHz	1.0E-3		ASTM D150
1 MHz1 MHz	1.0E-3		ASTM D150
耐电弧性Arc Resistance	127	sec	ASTM D495
相比漏电起痕指数Comparative Tracking Index	150	V	ASTM D3638
阻燃性能	额定值Nominal Value	单位Units	测试方法Test Method
阻燃等级Flame Rating			UL 94
0.80 mm0.8 mm	V-0		UL 94
1.50 mm1.5 mm	V-0		UL 94
补充信息	额定值Nominal Value	单位Units	测试方法Test Method
Specimen Thickness（Shrinkage）Specimen Thickness - Shrinkage	3.18	mm	Internal Method
机械性能	额定值Nominal Value	单位Units	测试方法Test Method
拉伸模量Tensile Modulus	12000	MPa	ISO 527-2/1A/1
拉伸强度拉伸强度
断裂，23℃断裂，23℃	172	MPa	ASTM D638
断裂断裂	170	MPa	ISO 527-2/1A/5
拉伸应变拉伸应变
断裂，23℃断裂，23℃	1.9	%	ASTM D638
断裂断裂	1.9	%	ISO 527-2/1A/5
弯曲模量弯曲模量
23℃23℃	11000	MPa	ISO 178
弯曲强度Flexural Stress 22	260	MPa	ISO 178
洛氏硬度洛氏硬度
M 级M 级	100		ASTM D785
M 级M 级	100		ISO 2039-2