江苏普及塑料有限公司
| 牌号简介About |
|---|
| 说明阻燃、耐热应用电气部件、IT/OA设备电视、监视器外壳 Flame Retardant, Heat resistant Application Electric parts, IT/OA device TV, monitor housing |
产品描述Product Description
厂家：韩国LG化学LG Polymers India Pvt. Ltd.
类别：ABSABS
用途：电视外壳;电气元件;
加工条件：注射成型Injection Molding
性能特点：防火阻燃等级V-1; 耐热性好; 阻燃;Flame Characteristics,Heat Resistance, Good,V-1
| 技术参数Technical Data | |||
|---|---|---|---|
|
|
额定值Nominal Value | 单位Units | 测试方法Test Method |
| 密度Specific Gravity | 1.19 | g/cm3 | ASTM D792 |
| 熔体质量流动速率熔体质量流动速率 | |||
| 220℃，10.0kg220℃/10.0 kg | 30 | g/10min | ASTM D1238 |
| 收缩率收缩率 | |||
| MD：3.2 mmMD，3.20 mm | 0.40 到 0.70 | % | ASTM D955 |
|
|
额定值Nominal Value | 单位Units | 测试方法Test Method |
| 悬臂梁缺口冲击强度Notched Izod Impact Strength | ASTM D256 | ||
| -30℃，3.2mm-30°C, 3.20 mm | 78 | J/m | ASTM D256 |
| -30℃，6.4mm-30°C, 6.40 mm | 59 | J/m | ASTM D256 |
| 23℃，3.2mm23°C, 3.20 mm | 240 | J/m | ASTM D256 |
| 23℃，6.4mm23°C, 6.40 mm | 180 | J/m | ASTM D256 |
|
|
额定值Nominal Value | 单位Units | 测试方法Test Method |
| 热变形温度Deflection Temperature Under Load | ASTM D648 | ||
| 0.45 MPa，未退火，6.4 mm66 psi, Unannealed, 0.252 in | 92.0 | ℃ | ASTM D648 |
| 1.8 MPa，未退火，6.4 mm264 psi, Unannealed, 0.252 in | 86.0 | ℃ | ASTM D648 |
| 维卡软化温度Vicat Softening Temperature | 93.0 | ℃ | ASTM D1525 6 |
| 相对温度指数RTI | 60.0 | ℃ | UL 746 |
| 电气性能电气性能 | 60.0 | ℃ | UL 746 |
| 冲击机械性能冲击机械性能 | 60.0 | ℃ | UL 746 |
|
|
额定值Nominal Value | 单位Units | 测试方法Test Method |
| 阻燃等级Flame Rating | UL 94 | ||
| 1.80 mm1.8 mm | V-1 | UL 94 | |
| 2.00 mm2.0 mm | V-0 5VB | UL 94 | |
| 3.00 mm3.0 mm | V-0 5VA | UL 94 | |
|
|
额定值Nominal Value | 单位Units | 测试方法Test Method |
| 洛氏硬度洛氏硬度 | |||
| R 级R 级 | 108 | ASTM D785 | |
| 拉伸模量拉伸模量3 | |||
| 3.20 mm3.20 mm3 | 2060 | MPa | ASTM D638 |
| 拉伸强度拉伸强度4 | |||
| 屈服，3.20 mm屈服，3.20 mm4 | 44.1 | MPa | ASTM D638 |
| 拉伸应变Tensile Elongation 44 | ASTM D638 | ||
| 屈服，3.20 mmYield, 0,126 in | 5.0 | % | ASTM D638 |
| 断裂，3.20 mmBreak, 0,126 in | 20 | % | ASTM D638 |
| 弯曲模量弯曲模量5 | |||
| 6.40 mm6.40 mm5 | 2550 | MPa | ASTM D790 |
| 弯曲强度弯曲强度5 | |||
| 6.40 mm6.40 mm5 | 73.5 | MPa | ASTM D790 |
