东莞市常平浩云塑胶经营部
SABIC 108MF10 PP
SABIC 108MF97 PP
SABIC 313MNK40 PP
SABIC 412MN40 PP
SABIC 48M10 PP
SABIC 48M40 PP
SABIC 4935 PP
SABIC 500P PP
SABIC 505P PP
SABIC 510A PP
SABIC 510P PP
SABIC 512MN10 PP
SABIC 513A PP
SABIC 513MNK10 PP
SABIC 513MNK40 PP
SABIC 514A PP
SABIC 515A PP
SABIC 520P PP
SABIC 521P PP
SABIC 522L PP
SABIC 523K PP
SABIC 524M PP
SABIC 524P PP
SABIC 525P PP
SABIC 526K PP
SABIC 527K PP
SABIC 531P PP
SABIC 531Ph PP
SABIC 56M10 PP
SABIC 571P PP
SABIC 575P PP
SABIC 576P PP
SABIC 576S PP
SABIC 577P PP
SABIC 578L PP
SABIC 578N PP
SABIC 578P PP
SABIC 579S PP
SABIC 58MNK10 PP
SABIC 612MK10 PP
SABIC 612MK46 PP
SABIC 620P PP
SABIC 621P PP
SABIC 622L PP
SABIC 670K PP
SABIC 670Kh PP
SABIC 680K PP
SABIC 71EK71PS PP
SABIC 83EK10 PP
SABIC 83MF10 PP
SABIC 83MF90 PP
SABIC 86MF10 PP
SABIC 86MF97 PP
SABIC 90910 PP
SABIC 95610 PP
SABIC CPC04C PP
SABIC CPC35C PP
SABIC CX02-81 PP
SABIC CX02-82 PP
SABIC CX03-81 PP
SABIC CX03-82 PP
SABIC CX04-81 PP
SABIC CX04-82 PP
SABIC FPC55 PP
SABIC FPH50 PP
SABIC PCG H10 PP
SABIC PCG H19 PP
SABIC PHC25 PP
SABIC PHC26 PP
SABIC PHC27 PP
SABIC PHC27-90 PP
SABIC PHC31 PP
SABIC PHC31-81 PP
SABIC QR673K PP
SABIC QR675K PP
SABIC RA12MN40 PP
SABIC RA1E10 PP
SABIC RA1E10h PP
SABIC RA2E70 PP
SABIC PPcompound 108CS20 PP
SABIC PPcompound 15T1020 PP
SABIC PPcompound 19T1040 PP
SABIC PPcompound 20MBT PP
SABIC PPcompound 20MBTF PP
SABIC PPcompound 20MBTFU PP
SABIC PPcompound 20MBTU PP
SABIC PPcompound 2401-1 PP
SABIC PPcompound 2402 PP
SABIC PPcompound 2500-4 PP
SABIC PPcompound 2500-6 PP
SABIC PPcompound 2550-4 PP
SABIC PPcompound 2605 PP
SABIC PPcompound 2605-1 PP
SABIC PPcompound 2609A PP
SABIC PPcompound 2632 PP
SABIC PPcompound 2632-8 PP
SABIC PPcompound 2636 PP
SABIC PPcompound 33MBTU PP
SABIC PPcompound 3720E PP
SABIC PPcompound 37T1020 PP
SABIC PPcompound 50MBTX PP
SABIC PPcompound 5292 PP
SABIC PPcompound 5405 PP
SABIC PPcompound 5450 PP
SABIC PPcompound 55T1030 PP
SABIC PPcompound 55T1030S PP
SABIC PPcompound 57F9722 PP
SABIC PPcompound 6504 PP
SABIC PPcompound 6604-5 PP
SABIC PPcompound 6612 PP
SABIC PPcompound 6614 PP
SABIC PPcompound 7450 PP
SABIC PPcompound 7500 PP
SABIC PPcompound 7510 PP
SABIC PPcompound 7530 PP
SABIC PPcompound 7536 PP
SABIC PPcompound 7540 PP
SABIC PPcompound 7600 PP
SABIC PPcompound 7603 PP
SABIC PPcompound 7605 PP
SABIC PPcompound 7610 PP
SABIC PPcompound 7632 PP
SABIC PPcompound 7690 PP
SABIC PPcompound 7693 PP
SABIC PPcompound 7700 PP
SABIC PPcompound 7705 PP
SABIC PPcompound 7706 PP
SABIC PPcompound 7715 PP
SABIC PPcompound 7716 PP
SABIC PPcompound 7795 PP
SABIC PPcompound 7890 PP
SABIC PPcompound 7990 PP
SABIC PPcompound 7990E PP
SABIC PPcompound 7995 PP
SABIC PPcompound 7996 PP
SABIC PPcompound 8500 PP
SABIC PPcompound 8600 PP
SABIC PPcompound 8700 PP
SABIC PPcompound 8900 PP
SABIC PPcompound 90910CSU05 PP
SABIC PPcompound 9150 PP
SABIC PPcompound 95610CSU10 PP
SABIC PPcompound G3230A PP
SABIC PPcompound MB7450 PP
SABIC PPcompound PHC22-20 PP
SABIC PPcompound PHC25-20 PP
SABIC STAMAX 20YK270E PP
SABIC STAMAX 20YM240 PP
SABIC STAMAX 20YM240E PP
SABIC STAMAX 30YK270E PP
SABIC STAMAX 30YM240 PP
SABIC STAMAX 30YM240E PP
SABIC STAMAX 30YM241 PP
SABIC STAMAX 30YM243 PP
SABIC STAMAX 40YM240 PP
SABIC STAMAX 40YM240E PP
SABIC STAMAX 40YM243 PP
SABIC STAMAX 50YM240 PP
SABIC STAMAX 60YM240 PP
SABIC Vestolen P 9000-67404 PP
SABIC Vestolen P 9026S PP
SABIC Vestolen P 9421 60130 PP
SABIC Vestolen P 9421 PP
SABIC Vestolen P 9421-65301 PP
SABIC Vestolen P 9421-65302 PP
SABIC Vestolen P 9421-66403 PP
SABIC Vestolen P 9421-66407 PP
SABIC Vestolen P 9421-66408 PP
SABIC Vestolen P 9421-66409 PP
SABIC Vestolen P 9421-67727 PP
SABIC Vestolen P 9422-67728 PP
SABIC Vestolen P X7142 67728 PP
SABIC PP 512MN10
抗冲击共聚聚丙烯
Saudi Basic Industries Corporation (SABIC)
产品说明：
This grade has excellent flow properties and a good combination of high impact strength and stiffness. It is widely used in articles where good processability, high toughness and a low warpage are required, e.g. vacuum-cleaner housings, large size flower pots, foodstuff containers and ice-cream containers.
The product mentioned herein is in particular not tested and therefore not validated for use in pharmaceutical/medical applications
The product mentioned herein is in particular not tested and therefore not validated for use in pharmaceutical/medical applications
SABIC PP 512MN10 物性表
| 基本信息 | |
|---|---|
| 黄卡编号 | |
| 特性 |
|
| 用途 |
|
| UL文件号 |
|
| 形式 |
|
| 加工方法 |
|
| 物理性能 | 额定值 | 单位制 | 测试方法 |
|---|---|---|---|
| 密度 | 0.905 | g/cm3 | ISO 1183 |
| 熔流率（熔体流动速率）(230°C/2.16 kg) | 37 | g/10 min | ISO 1133 |
| 硬度 | 额定值 | 单位制 | 测试方法 |
|---|---|---|---|
| 洛氏硬度(R 级) | 95 | ASTM D785 | |
| 肖氏硬度(邵氏 D) | 63 | ISO 868 |
| 机械性能 | 额定值 | 单位制 | 测试方法 |
|---|---|---|---|
| 拉伸模量 | |||
| 1% 正割1 | 1400 | MPa | ASTM D638 |
| -- | 1300 | MPa | ISO 527-2/1A/1 |
| 抗张强度 | |||
| 屈服2 | 28.0 | MPa | ASTM D638 |
| 屈服 | 25.0 | MPa | ISO 527-2/1A/50 |
| 伸长率 | |||
| 屈服3 | 5.0 | % | ASTM D638 |
| 屈服 | 5.0 | % | ISO 527-2/1A/50 |
| 冲击性能 | 额定值 | 单位制 | 测试方法 |
|---|---|---|---|
| 简支梁缺口冲击强度 | ISO 179/1eA | ||
| -20°C | 5.0 | kJ/m2 | ISO 179/1eA |
| 0°C | 7.0 | kJ/m2 | ISO 179/1eA |
| 23°C | 11 | kJ/m2 | ISO 179/1eA |
| 悬壁梁缺口冲击强度 | |||
| -20°C | 55 | J/m | ASTM D256A |
| 0°C | 65 | J/m | ASTM D256A |
| 23°C | 90 | J/m | ASTM D256A |
| -20°C | 5.0 | kJ/m2 | ISO 180/1A |
| 0°C | 6.5 | kJ/m2 | ISO 180/1A |
| 23°C | 8.0 | kJ/m2 | ISO 180/1A |
| 热性能 | 额定值 | 单位制 | 测试方法 |
|---|---|---|---|
| 载荷下热变形温度 | |||
| 0.45 MPa, 未退火 | 90.0 | °C | ASTM D648 |
| 0.45 MPa, 未退火4 | 85.0 | °C | ISO 75-2/Bf |
| 1.8 MPa, 未退火 | 60.0 | °C | ASTM D648 |
| 1.8 MPa, 未退火5 | 55.0 | °C | ISO 75-2/Af |
| 维卡软化温度 | |||
| -- | 150 | °C | ASTM D1525, ISO 306/A12066 |
| -- | 75.0 | °C | ASTM D1525, ISO 306/B12077 |
| 备注 | |
|---|---|
| 1 . | 5.0 mm/min |
| 2 . | 50 mm/min |
| 3 . | 50 mm/min |
| 4 . | testbar 80*10*4mm |
| 5 . | testbar 80*10*4mm |
| 6 . | 标准 B (120°C/h), 压 力1 (10N) |
| 7 . | 标准 B (120°C/h), 载荷2 (50N) |
