江苏普及塑料有限公司
| 牌号简介About |
|---|
| Noryl GTX914是一种未填充的GTX等级，具有理想的冲击性能、高温下的尺寸稳定性、耐化学性和加工性。 NORYL GTX914 is an unfilled GTX grade with an ideal combination of impact performance, dimensional stability at elevated temperatures, chemical resistance and processability. |
产品描述Product Description
厂家：沙特沙伯基础SABIC
类别：PPO(PPE)+PS+PAPPO(PPE)+PS+PA
用途：电气/电子应用领域;电子显示器;汽车外部零件;汽车内部零件;
加工条件：注射成型Injection Molding
性能特点：尺寸稳定性好; 耐化学性; 冲击性能好; 易加工;Excellent Processability,High impact resistance,Good Dimensional Stability,Solvent resistance
| 技术参数Technical Data | |||
|---|---|---|---|
|
|
额定值Nominal Value | 单位Units | 测试方法Test Method |
| 密度密度 / 比重 | |||
| ---- | 1.10 | g/cm3 | ASTM D792 |
| ---- | 1.09 | g/cm3 | ISO 1183 |
| 熔体质量流动速率熔体质量流动速率 | |||
| 280℃，5.0kg280℃/5.0 kg | 12 | g/10min | ASTM D1238 |
| 熔体体积流动速率熔体体积流动速率 | |||
| 280℃，5 kg280℃/5.0 kg | 11.0 | cm3/10min | ISO 1133 |
| 收缩率Molding Shrinkage | |||
| MD流动 22 | 1.5 到 1.9 | % | |
| MD：3.2 mm流动 : 3.20 mm | 1.3 到 1.6 | % | |
| TD：3.2 mm横向流动 : 3.20 mm | 1.1 到 1.4 | % | |
| 吸水率Water Absorption | |||
| 饱和，23℃Saturation, 73°F | 3.5 | % | |
| 平衡，23℃，50% RHEquilibrium, 73°F, 50% RH | 1.2 | % | |
|
|
额定值Nominal Value | 单位Units | 测试方法Test Method |
| 简支梁缺口冲击强度简支梁缺口冲击强度88 | |||
| -30℃-30°C | 15 | kJ/m2 | ISO 179/1eA |
| 23℃23°C | 30 | kJ/m2 | ISO 179/1eA |
| 悬臂梁缺口冲击强度Notched Izod Impact Strength | |||
| -30℃-30°C | 120 | J/m | ASTM D256 |
| 23℃23°C | 280 | J/m | ASTM D256 |
| -30℃-30°C99 | 15 | kJ/m2 | ISO 180-1A |
| 23℃23°C99 | 30 | kJ/m2 | ISO 180-1A |
| 装有测量仪表的落镖冲击装有测量仪表的落镖冲击 | |||
| 23℃，Total Energy23℃，Total Energy | 60.0 | J | ASTM D3763 |
|
|
额定值Nominal Value | 单位Units | 测试方法Test Method |
| 热变形温度Deflection Temperature Under Load | |||
| 0.45 MPa，未退火，3.2 mm66 psi, Unannealed, 0.126 in | 180 | ℃ | ASTM D648 |
| 0.45 MPa，未退火，100 mm跨距0.45 MPa, 未退火, 4.00 mm, 100 mm 跨距1010 | 180 | ℃ | ISO 75-2/Be |
| 维卡软化温度Vicat Softening Temperature | |||
| ---- | 195 | ℃ | ASTM D1525 11 |
| A50-- | 245 | ℃ | ISO 306/A50 |
| B50-- | 190 | ℃ | ISO 306 |
| 球压测试球压测试 | |||
| 123~127℃123 到 127℃ | 通过 | IEC 60695-10-2 | |
| 线性热膨胀系数CLTE | |||
| MD：-40~40℃Flow : -40 to 104°F | 9.0E-5 | 1/℃ | ASTM E831 |
| MD：23~60℃Flow : 73 to 140°F | 9.0E-5 | 1/℃ | ISO 11359-2 |
| TD：-40~40℃Transverse : -40 to 104°F | 9.5E-5 | 1/℃ | ASTM E831 |
| TD：23~60℃Transverse : 73 to 140°F | 9.0E-5 | 1/℃ | ISO 11359-2 |
| 导热系数Thermal Conductivity | 0.23 | W/m/K | ISO 8302 |
|
|
额定值Nominal Value | 单位Units | 测试方法Test Method |
| 介电强度介电强度 | |||
| 3.2 mm，在油中3.20 mm，在油中 | 20 | kV/mm | IEC 60243-1 |
| 相对电容率Relative Permittivity | |||
| 50 Hz50 Hz | 3.50 | ||
| 60 Hz60 Hz | 3.50 | ||
| 1 MHz1 MHz | 2.70 | ||
| 耗散因数Dissipation Factor | |||
| 50 Hz50 Hz | 0.072 | ||
| 60 Hz60 Hz | 0.072 | ||
| 1 MHz1 MHz | 0.024 | ||
| 相比漏电起痕指数Comparative Tracking Index | 600 | V | IEC 60112 |
|
|
额定值Nominal Value | 单位Units | 测试方法Test Method |
| 1.60 mm1.6 mm，Testing by SABIC | HB | UL 94 | |
|
|
额定值Nominal Value | 单位Units | 测试方法Test Method |
| 球压硬度球压硬度 | |||
| H358/30H 358/30 | 90.0 | MPa | ISO 2039-1 |
| 拉伸模量Tensile Modulus | |||
| ----33 | 1950 | MPa | ASTM D638 |
| ---- | 2100 | MPa | ISO 527-1-2 |
| 拉伸强度Tensile Strength | |||
| 屈服屈服44 | 55.0 | MPa | ASTM D638 |
| 屈服Yield | 55.0 | MPa | ISO 527-2/50 |
| 断裂断裂44 | 55.0 | MPa | ASTM D638 |
| 断裂Break | 55.0 | MPa | ISO 527-2/50 |
| 拉伸应变Tensile Elongation | |||
| 屈服屈服44 | 15 | % | ASTM D638 |
| 屈服Yield | 7.5 | % | ISO 527-2/50 |
| 断裂断裂44 | 100 | % | ASTM D638 |
| 断裂Break | 60 | % | ISO 527-2/50 |
| 弯曲模量Flexural Modulus | |||
| 50 mm跨距50.0 mm 跨距55 | 1900 | MPa | ASTM D790 |
| ----66 | 2000 | MPa | ISO 178 |
| 弯曲强度Flexural Stress | |||
| ----6,76 ,7 | 80.0 | MPa | ISO 178 |
| 屈服，50 mm跨度屈服, 50.0 mm 跨距55 | 80.0 | MPa | ASTM D790 |
| 泰伯耐磨性泰伯耐磨性 | |||
| 1000 周期，1000 g，CS-17 转轮1000 周期，1000 g，CS-17 转轮 | 15.0 | mg | 内部方法 |
