TPU/德国巴斯fu 1185A10 耐磨耐油透明弹性好|价格|厂家|多少钱-全球塑胶网-移动端

牌号简介About
弹性体1185A是专门针对挤出型材、片材和薄膜应用而配制的。它具有优异的耐磨性、韧性、透明度、低温柔韧性、水解稳定性和抗真菌性。它具有优良的阻尼特性和优异的抗撕裂扩展性能。Elastollan? 1185A10为UL-94HB，用于1.5mm壁厚的垂直火焰试验。Elastollan 1185A也符合FDA食品接触部分，第21卷，第177.2600节。Elastollan 1185A还拥有NSF标准61“水接触材料”认证。弹性体1185A以未着色的切片或粒状形式提供。 Elastollan? 1185A is specifically formulated for extruded profile, sheet and film applications. It exhibits excellent abrasion resistance, toughness, transparency, very good low temperature flexibility, hydrolytic stability and fungus resistance. It has excellent damping characteristics and outstanding resistance to tear propagation. Elastollan? 1185A10 is rated UL-94 HB in vertical flame test for wall thickness of 1.5 mm. Elastollan? 1185A also conforms to the FDA food contact section, book 21, section 177.2600. Elastollan? 1185A also has NSF Standard 61 "Water Contact Material" certification. Elastollan? 1185A is supplied uncolored in diced or pelletized form.

牌号简介About

弹性体1185A是专门针对挤出型材、片材和薄膜应用而配制的。它具有优异的耐磨性、韧性、透明度、低温柔韧性、水解稳定性和抗真菌性。它具有优良的阻尼特性和优异的抗撕裂扩展性能。Elastollan? 1185A10为UL-94HB，用于1.5mm壁厚的垂直火焰试验。Elastollan 1185A也符合FDA食品接触部分，第21卷，第177.2600节。Elastollan 1185A还拥有NSF标准61“水接触材料”认证。弹性体1185A以未着色的切片或粒状形式提供。 Elastollan? 1185A is specifically formulated for extruded profile, sheet and film applications. It exhibits excellent abrasion resistance, toughness, transparency, very good low temperature flexibility, hydrolytic stability and fungus resistance. It has excellent damping characteristics and outstanding resistance to tear propagation. Elastollan? 1185A10 is rated UL-94 HB in vertical flame test for wall thickness of 1.5 mm. Elastollan? 1185A also conforms to the FDA food contact section, book 21, section 177.2600. Elastollan? 1185A also has NSF Standard 61 "Water Contact Material" certification. Elastollan? 1185A is supplied uncolored in diced or pelletized form.

产品描述Product Description

厂家：德国巴斯夫BASF Polyurethanes GmbH

类别：TPU-醚TPU-醚

颜色：清晰/透明

加工条件：挤出Extrusion

性能特点：防火阻燃等级HB; 耐低温柔性; 耐磨; 机械强度好-撕裂; 细菌阻隔; 耐水解; 食品接触; 韧性好;Good flexibility,Hydrolysis stability,Antimicrobial properties,Food contact compliance,Low temperature toughness,Good tear strength,Good wear resistance,HB

技术参数Technical Data
物理性能	额定值Nominal Value	单位Units	测试方法Test Method
密度Specific Gravity	1.12	g/cm3	ASTM D792
熔体质量流动速率Melt Mass-Flow Rate (MFR)			ASTM D1238
190℃，21.6kg190°C/21.6 kg	1.0 to 20	g/10min	ASTM D1238
190℃，8.70kg190°C/8.7 kg	1.0 to 10	g/10min	ASTM D1238
机械性能	额定值Nominal Value	单位Units	测试方法Test Method
邵氏硬度邵氏硬度
邵氏 A邵氏 A	85		ASTM D2240
拉伸模量拉伸模量
注塑成型注塑	20.7	MPa	ASTM D412
弯曲模量弯曲模量
注塑成型注塑	29.0	MPa	ASTM D790
泰伯耐磨性Taber Abrasion Resistance	30.0	mg	ASTM D1044
Abrasion（DIN）Abrasion - DIN	25	mm3	DIN 53516
弹性体	额定值Nominal Value	单位Units	测试方法Test Method
拉伸强度Tensile Strength	35.9	MPa	ASTM D412
300% 应变300%应变	21.4	MPa	ASTM D412
100% 应变100%应变	9.65	MPa	ASTM D412
拉伸应变拉伸应变
断裂断裂	530	%	ASTM D412
撕裂强度Tear Strength 22	110	kN/m	ASTM D624
压缩形变Compression Set			ASTM D395B
23℃，22 hr23°C, 22 hr	25	%	ASTM D395B
70℃，22 hr70°C, 22 hr	45	%	ASTM D395B
热性能	额定值Nominal Value	单位Units	测试方法Test Method
玻璃化转变温度Glass Transition Temperature	-38.0	℃	内部方法
维卡软化温度Vicat Softening Temperature	100	℃	ASTM D1525
软化温度软化温度
DMADMA	66	℃	Internal Method
阻燃性能	额定值Nominal Value	单位Units	测试方法Test Method
阻燃等级1.5 mm
1.50 mm	HB		UL 94

备注