江苏普及塑料有限公司
| 牌号简介About |
|---|
| 挤压和注射成型等级；水解稳定；带有特殊的紫外线稳定剂；带有脱模剂；壁厚达6 mm的透明材料；良好的耐磨性；应用；运动鞋鞋底；薄膜；软管，非增强型 Extrusion- and injection molding grade; hydrolysis-stabilised; with special UV stabilizers; with release agent; transparent up to 6 mm wall thickness; good wear resistance; Application; Sports shoe soles; Films; Hoses, non-reinforced |
产品描述Product Description
厂家：德国科思创Covestro - PUR
类别：TPU-酯TPU-酯
用途：鞋类;薄膜;管道;
加工条件：注射成型Injection Molding
性能特点：耐磨; 耐候抗UV;Weather resistance is good,Good wear resistance
紫外线：UV Stabilized
| 技术参数Technical Data | |||
|---|---|---|---|
|
|
额定值Nominal Value | 单位Units | 测试方法Test Method |
| 密度Density | |||
| 23℃23°C | 1.21 | g/cm3 | ISO 1183 |
| ---- | 1.21 | g/cm3 | ISO 1183 2 |
|
|
额定值Nominal Value | 单位Units | 测试方法Test Method |
| 撕裂强度撕裂强度5 | |||
| 23℃23℃5 | 95 | kN/m | ISO 34-1 |
| 压缩形变Compression Set | |||
| 23℃，72 hr23°C, 72 hr | 21 | % | |
| 70℃，24 hr70°C, 24 hr44 | 42 | % | |
| 70℃，24 hr70°C, 24 hr66 | 25 | % | |
| 回弹性Rebound Resilience | 29 | % | ISO 4662 |
|
|
额定值Nominal Value | 单位Units | 测试方法Test Method |
| 邵氏硬度Durometer Hardness | |||
| 邵氏 A，1 秒，23℃邵氏 A, 1 秒, 23°C | 91 | ISO 7619 | |
| 邵氏 D，1 秒，23℃邵氏 D, 1 秒, 23°C | 40 | ISO 7619 | |
| 邵氏 A，3 秒邵氏 A, 3 sec | 91 | ISO 868 2 | |
| 邵氏 D，15 秒邵氏 D, 15 sec | 40 | ISO 868 2 | |
| 拉伸强度拉伸应力33 | |||
| 断裂，23℃Break, 73°F | 60.2 | MPa | |
| 10% 应变，23℃10% Strain, 73°F | 3.50 | MPa | |
| 50% 应变，23℃50% 应变, 23°C | 8.00 | MPa | |
| 100% 应变，23℃100% 应变, 23°C | 10.0 | MPa | |
| 300% 应变，23℃300% 应变, 23°C | 23.9 | MPa | |
| 拉伸应变拉伸应变3 | |||
| 断裂，23℃断裂，23℃3 | 510 | % | DIN 53504 |
| 拉伸储能模量Tensile Storage Modulus | |||
| -20℃-20°C | 940 | MPa | |
| 20℃20°C | 94.0 | MPa | |
| 60℃60°C | 54.0 | MPa | |
| 25.0 | mm3 | ISO 4649 | |
