江苏普及塑料有限公司
| 牌号简介About |
|---|
| 说明BI710，Hanwha Total Hipp，是注射成型应用的冲击共聚物。由于高结晶均聚物基体与精心设计的橡胶形态的理想结合，它具有很高的刚性和很好的冲击强度。特点刚度和冲击强度平衡好抗静电性好加工性和生产效率应用家庭用品、容器、板条箱、玩具 Description BI710, Hanwha Total HIPP, is impact copolymer for injection molding application. It exhibits a high rigidity as well as an excellent impact strength due to the ideal combination of highly crystalline homo matrix and the well-designed rubber morphology. Characteristics Good balance of stiffness and impact strength Anti-static Good processability and productivity Applications Housewares, container, crate box, toys |
产品描述Product Description
厂家：韩国韩华HANWHA TOTAL PETROCHEMICALS Co., Ltd.
类别：PP共聚PP copolymer
用途：家用货品;玩具;容器;装货箱;
加工条件：注射成型Injection Molding
性能特点：抗静电; 抗冲共聚物; 机械强度好; 高结晶; 冲击性能好; 食品接触; 易加工;Good Rigidity,Excellent Processability,High impact resistance,Food contact compliance,Antistatic property,High crystallization,Impact copolymer
| 技术参数Technical Data | |||
|---|---|---|---|
|
|
额定值Nominal Value | 单位Units | 测试方法Test Method |
| 密度Density | 0.910 | g/cm3 | ASTM D1505 |
| 熔体质量流动速率熔体质量流动速率 | |||
| 230℃，2.16kg230℃/2.16 kg | 20 | g/10min | ASTM D1238 |
|
|
额定值Nominal Value | 单位Units | 测试方法Test Method |
| 悬臂梁缺口冲击强度Notched Izod Impact Strength | ASTM D256 | ||
| -20℃-20°C | 44 | J/m | ASTM D256 |
| 0℃0°C | 54 | J/m | ASTM D256 |
| 23℃23°C | 88 | J/m | ASTM D256 |
|
|
额定值Nominal Value | 单位Units | 测试方法Test Method |
| 热变形温度热变形温度 | |||
| 0.45 MPa，未退火0.45 MPa，未退火 | 120 | ℃ | ASTM D648 |
|
|
额定值Nominal Value | 单位Units | 测试方法Test Method |
| 洛氏硬度洛氏硬度 | |||
| R 级R 级 | 85 | ASTM D785 | |
| 拉伸强度拉伸强度 | |||
| 屈服屈服 | 27.5 | MPa | ASTM D638 |
| 拉伸应变拉伸应变 | |||
| 断裂断裂 | 150 | % | ASTM D638 |
| 弯曲模量Flexural Modulus | 1420 | MPa | ASTM D790 |
