东莞市常平浩云塑胶经营部
INSPIRE 114 EU PP
INSPIRE 114 PP
INSPIRE 136 PP
INSPIRE 137 (Blow Molding Extrusion) PP
INSPIRE 137 (Film Extrusion) PP
INSPIRE 137 NA PP
INSPIRE 147 PP
INSPIRE 150 PP
INSPIRE 222 PP
INSPIRE 227 PP
INSPIRE 361 PP
INSPIRE 364 PP
INSPIRE 404 PP
INSPIRE 702 PP
INSPIRE T710-25 ES PP
INSPIRE TF0601 ESU PP
INSPIRE TF0602S PP
INSPIRE TF0809Z PP
INSPIRE TF0810 ESU PP
INSPIRE TF0811 PP
INSPIRE TF1301 PP
INSPIRE TF1302 PP
INSPIRE TF1306 PP
INSPIRE TF1307 PP
INSPIRE TF1501 PP
INSPIRE TF1502 PP
INSPIRE TF2301 PP
INSPIRE TF2302 PP
INSPIRE TF4700SZ PP
INSPIRE TF7000 ES PP
INSPIRE TF1501 ESU
Performance Polymers
10% 填料
Trinseo
产品说明：
INSPIRE TF1501 ESU has been developed for aesthetic automotive applications with good scratch resistance and UV light stabilisation. It is especially suitable for car interiors requiring ductility at ambient temperature. It combines low density, good stiffness and impact strength whilst maintaining excellent heat resistance and processability.
Applications:
- Instrument panel retainer
- Instrument panel trim
- Mid console
- Door panel
- Door pockets
- Interior trim
- Trunk trim
Applications:
- Instrument panel retainer
- Instrument panel trim
- Mid console
- Door panel
- Door pockets
- Interior trim
- Trunk trim
INSPIRE TF1501 ESU 物性表
| 基本信息 | |
|---|---|
| 填料/增强材料 |
|
| 添加剂 |
|
| 特性 |
|
| 用途 |
|
| 形式 |
|
| 物理性能 | 额定值 | 单位制 | 测试方法 |
|---|---|---|---|
| 密度 | 0.970 | g/cm3 | ISO 1183 |
| 熔流率（熔体流动速率）(230°C/2.16 kg) | 17 | g/10 min | ISO 1133 |
| 收缩率 | 1.0 到 1.4 | % | ISO 294-4 |
| 机械性能 | 额定值 | 单位制 | 测试方法 |
|---|---|---|---|
| 拉伸模量 | 1600 | MPa | ISO 527-2/1 |
| 拉伸应力(屈服) | 23.0 | MPa | ISO 527-2/50 |
| 拉伸应变(断裂) | 50 | % | ISO 527-2/50 |
| 弯曲模量 | 1700 | MPa | ISO 178 |
| 热性能 | 额定值 | 单位制 | 测试方法 |
|---|---|---|---|
| 热变形温度 | |||
| 0.45 MPa, 未退火 | 95.0 | °C | ISO 75-2/B |
| 1.8 MPa, 未退火 | 55.0 | °C | ISO 75-2/A |
| 脆化温度1 | -10.0 | °C | ISO 6603-2 |
| 维卡软化温度 | |||
| -- | 145 | °C | ISO 306/A120 |
| -- | 65.0 | °C | ISO 306/B50 |
| 线形热膨胀系数 - 流动 | ISO 11359-2 | ||
| -30 到 23°C | 6.5E-5 | cm/cm/°C | ISO 11359-2 |
| 23 到 85°C | 1.0E-4 | cm/cm/°C | ISO 11359-2 |
| 可燃性 | 额定值 | 单位制 | 测试方法 |
|---|---|---|---|
| 燃烧速率2(1.00 mm) | 100 | mm/min | ISO 3795 |
| 注射 | 额定值 | 单位制 | |
|---|---|---|---|
| 干燥温度 | 80.0 | °C | |
| 干燥时间 | 2.0 | hr | |
| 加工（熔体）温度 | 220 到 260 | °C | |
| 模具温度 | 20.0 到 60.0 | °C |
| 备注 | |
|---|---|
| 1 . | 2 mm |
| 2 . | This rating not intended to reflect hazards presented by this or any other material under actual fire conditions. |
