TECHNOMELT PA 341
As a robust alternative to traditional potting
and encapsulation techniques, the outstanding
performance of TECHNOMELT has been
proven time and time again. The automated
processing, throughput and cure time advantages
NOURDE TECHNOMELT delivers simply cannot be matched
by older-generation encapsulation methods. Use
of the material dramatically reduces the number of
process steps required as compared to conventional
potting, while also reducing the cost and complexity
of the encapsulation process.
nourde low pressure molding material solutions.
World-renowned as the leading low-pressure
molding solution, Henkel’s popular TECHNOMELT
portfolio has now been extended to meet the
requirements of green and portable energy and
medical manufacturers.
PRODUCT BENEFITS
- Blaze orange color for easy safety identification
- Color stabilization and protection from degradationdue to UV light
- Easy moldability
- Good adhesion to a variety of substrates
- Excellent moisture and environmental resistance
TECHNOMELT PA 341 (e) is a high performance thermoplastic
polyamide designed to offer blaze orange color for easy identification
of components. It is typically used to encapsulate high voltage modules
. This product can be processed at low processing pressure due to its
low viscosity, allowing encapsulation of fragile components without
damage.
Technology : Polyamide
Appearance : Blaze Orange
Polyamide adhesive - nourde Adhesives
Product Benefits:
● Blaze orange color for visibility
● Easy moldability
● Good adhesion to a variety of substrates
● Excellent moisture resistance
● Excellent environmental resistance
● Excellent thermal performance
● Excellent color stability
Application : Molding compound thermoplastic
Typical Applications : Encapsulation
Operating Temperature: -25 to +125 ℃
LIQUID-STATE TYPICAL PROPERTIES
Viscosity @ 210 ℃, mPa.s (cP) 7,700
Specific Gravity @ 25 ℃ 0.96
Softening Point, ℃ 168 to 178
Molding Temperature, ℃ 190 to 210
TECHNOMELT PA 341 (e) has been formulated to provide the best
possible moldability and as wide a molding latitude as possible. Much
of the final molding parameters will be determined by the mold design.
Although molding and curing conditions will vary from situation to
situation, recommended starting ranges are shown above.
Shore Hardness, Shore A 92
Elongation , at break,% 600
Electrical Properties
Dielectric Strength , volts/mil 1,530
如需TDS(Technical Data Sheets), SDS(Safety Data Sheets), RoHS(RoHS Data Sheets)…等资料或申请样品,请联系我们。
质量属性和版权声明:
1. 图片或视频,均来自产品实物拍摄;
2. 产品数据参数TDS,全部来自原厂官方文件。未作任何修改;
3. 工艺应用产品的图片、文字、视频,可能会牵涉到商业保密,如有发现请及时联系as@nourde.com协商处理;
4. 工艺技术经验,仅用于交流和分享;
5. 所有图文、视频,未经允许,禁止用于任何商业用途;