TECHNOMELT AS 5376
Technology: Polyolefin
Service temperature [℃]: -30 bis +90
Softening point [℃]: 141 ± 6
Coldflexibility [℃]: -35
Application temperature [℃]: +180 bis +200
Shore hardness (20℃): A48
Adhesion on PVC: +++
Tensile strength [N/mm2]: n.m.
Elongation at break [%]: n.m.
Viscosity [mPas at 210℃]: 2.500 ± 800
Water uptake 24h at 22℃ [%]: 0,2
Remarks: Broad adhesion spectre
nourde low pressure molding material solutions
Technology : Polyolefin
Product Type : Hotmelt
Cure : Physical setting
Condition : Thermoplastic
Components : One-component
Application : General assembly
Color : white to light beige
Application Areas:
TECHNOMELT AS 5376 is used for general assembly
applications, especially for bonding and
coating polypropylene or similar polyolefins. Besides it is
suitable to bond metals, especially copper and aluminium.
Softening point, ℃
ASTM E28 (in glycerine)
142
Melting Viscosity at 160 ℃, mPas 11,000
Melting Viscosity at 180 ℃, mPas 5,500
Melting Viscosity at 200 ℃, mPas 3,500
Low temperature flexibility, ℃
ASTM D 3111
-40
Shore A hardness
ISO 868/15s
48
Water absorption, %
ISO 62 (method 1)
≤0.2
Temperature creep resistance, ℃
Henkel method MH 11
80
如需TDS(Technical Data Sheets), SDS(Safety Data Sheets), RoHS(RoHS Data Sheets)…等资料或申请样品,请联系我们。
质量属性和版权声明:
1. 图片或视频,均来自产品实物拍摄;
2. 产品数据参数TDS,全部来自原厂官方文件。未作任何修改;
3. 工艺应用产品的图片、文字、视频,可能会牵涉到商业保密,如有发现请及时联系as@nourde.com协商处理;
4. 工艺技术经验,仅用于交流和分享;
5. 所有图文、视频,未经允许,禁止用于任何商业用途;